Sensata / Cynergy3 RSF80 Series Horizontal Silicone, Nitrile Rubber (NBR), Viton Float Switch, 1 m Cable, NO/NC, 300 V

RS Stock No.:: 725-9877
Mfr. Part No.:: RSF86H050T
Manufacturer:: Sensata / Cynergy3

Sensata / Cynergy3 RSF80 Series Horizontal Silicone, Nitrile Rubber (NBR), Viton Float Switch, 1 m Cable, NO/NC, 300 V

Bulk discount available

Subtotal (1 unit)*

TWD1,186.00

(exc. GST)

TWD1,245.30

(inc. GST)

Add 2 units to get free delivery

Orders below TWD1,300.00 (exc. GST) cost TWD500.00.

In Stock

2 unit(s) ready to ship from another location
Plus 20 unit(s) shipping from February 27, 2026

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 - 5	TWD1,186.00
6 - 11	TWD1,139.00
12 +	TWD1,091.00

*price indicative

RS Stock No.:: 725-9877
Mfr. Part No.:: RSF86H050T
Manufacturer:: Sensata / Cynergy3

Specifications

Product overview and Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Sensata / Cynergy3
	Product Type	Float Switch
	Mount Type	Horizontal
	Switch Output	NO/NC
	Housing Material	Polyphenylene Sulphide
	Cable Length	1m
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	120°C
	Maximum AC Voltage	300V ac
	Maximum DC Voltage	300V dc
	Maximum Current	600mA
	Gasket Material	Silicone, Nitrile Rubber (NBR), Viton
	Standards/Approvals	UL and NSF, WRAS
	Series	RSF80
	Hazardous Area Certification	No

	Select all
	Brand Sensata / Cynergy3
	Product Type Float Switch
	Mount Type Horizontal
	Switch Output NO/NC
	Housing Material Polyphenylene Sulphide
	Cable Length 1m
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 120°C
	Maximum AC Voltage 300V ac
	Maximum DC Voltage 300V dc
	Maximum Current 600mA
	Gasket Material Silicone, Nitrile Rubber (NBR), Viton
	Standards/Approvals UL and NSF, WRAS
	Series RSF80
	Hazardous Area Certification No

RSF80 Series External Float Switch Datasheet

COO (Country of Origin):: CN

This float switch is designed for mounting through the outside wall of a tank using a ½ inch NPT or ½ inch BSP threaded hole or boss

PPS material

½ inch NPT or ½ inch BSP external mounting

50cm ETFE flying leads

WRAS approved

Product Application Information

This PPS float switch is suitable for use in most organic and inorganic chemicals and most oils. Typical applications include diesel generators, hydraulic oil and gearbox oil levels.

Cynergy3 Horizontal Float Switches

Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS approval explained

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?

• Nylon

• Polypropylene

• Polypropylene Sulfide (PPS)

Features and Benefits

• Operating temperature: -10 °C to +120 °C

• N/O or N/C Switch output

• Switch action may be reversed by rotating the switch through 180º

• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile

• Flying Lead

• M12 plug connection

• Internal & external fitting inside a tank

• UL recognised

Typical Applications

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.