Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 41 - 60 of 158 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 175-6029
Mfr. Part No.JBX1OUTLS13
BrandSouriau
TWD6,979.00
Each
units
Locator JBX - -
RS Stock No. 827-3669
Mfr. Part No.3443-82-08
Brand3M
TWD11,905.00
Each
units
Locator 451 8 3443
RS Stock No. 173-9639
Mfr. Part No.63819-1575
BrandMolex
TWD1,851.00
Each
units
Locator 207128 - 63819
RS Stock No. 426-3283
Mfr. Part No.K1476
BrandGlenair
TWD4,112.00
Each
units
Positioner K - -
RS Stock No. 827-3663
Mfr. Part No.3443-82-10
Brand3M
TWD11,904.00
Each
units
Locator 451 10 3443
RS Stock No. 876-2046
Mfr. Part No.303848-2
TWD1,752.00
Each
units
Pin - - -
RS Stock No. 864-3422
Mfr. Part No.354003-2
TWD8,046.00
Each
units
Wire Crimper - - -
RS Stock No. 876-2321
Mfr. Part No.58516-1
TWD2,247.00
Each
units
Locator PRO-CRIMPER III - -
RS Stock No. 822-7632
Mfr. Part No.63800-0143
BrandMolex
TWD1,633.20
Each (In a Pack of 5)
units
Cam Follower Pin T9999 - 63800
RS Stock No. 174-3167
Mfr. Part No.908916-1
TWD35,818.00
Each
units
Anvil - - -
RS Stock No. 174-3156
Mfr. Part No.5-456406-6
TWD5,425.00
Each
units
Wire Crimper - - -
RS Stock No. 885-9605
Mfr. Part No.127-0000-904
TWD476.00
Each
units
Positioner SMP - -
RS Stock No. 721-1443
Mfr. Part No.1208474
TWD1,884.00
Each
units
Assembly Tool SACC BIT M8-D12 - -
RS Stock No. 876-2065
Mfr. Part No.300389
TWD376.00
Each
units
Pin CERTI-CRIMP - -
RS Stock No. 168-0568
Mfr. Part No.525442-8
TWD7,526.00
1 Box of 1
Box(es)
Plug Gauge - - -
RS Stock No. 864-7026
Mfr. Part No.1673672-1
TWD188,390.00
Each
units
Crimping Head - - -
RS Stock No. 787-9566
Mfr. Part No.S16RCM16
BrandSouriau
TWD9,665.00
Each
units
- UTS Series 16 -
RS Stock No. 174-3151
Mfr. Part No.5-22280-0
TWD68.00
Each
units
Spring - - -
RS Stock No. 174-3153
Mfr. Part No.354550-3
TWD6,252.00
Each
units
Lubricator Bowl - - -
RS Stock No. 864-3380
Mfr. Part No.2031884-1
TWD6,882.00
Each
units
Anvil OCEAN - -