Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 21 - 40 of 158 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 174-3160
Mfr. Part No.234156-6
TWD5,425.00
Each
units
Wire Crimper - - -
RS Stock No. 174-3161
Mfr. Part No.453819-3
TWD5,464.00
Each
units
Wire Crimper - - -
RS Stock No. 174-3169
Mfr. Part No.908917-1
TWD28,259.00
Each
units
Anvil - - -
RS Stock No. 174-3162
Mfr. Part No.690587-1
TWD6,252.00
Each
units
Wire Crimper - - -
RS Stock No. 864-7095
Mfr. Part No.1490746-1
TWD73,031.00
Each
units
Crimping Head - - -
RS Stock No. 864-3434
Mfr. Part No.354005-1
TWD3,411.00
Each
units
Shear Blade - - -
RS Stock No. 876-2359
Mfr. Part No.525441-4
TWD12,321.00
Each
units
Plug Gauge - - -
RS Stock No. 174-3163
Mfr. Part No.690716-3
TWD6,252.00
Each
units
Wire Crimper - - -
RS Stock No. 721-1437
Mfr. Part No.1208445
TWD2,890.00
Each
units
Assembly Tool SACC BIT M12-D20 - -
RS Stock No. 864-3368
Mfr. Part No.1583527-1
TWD102,262.00
Each
units
Pneumatic Adapter 626 - -
RS Stock No. 687-5762
Mfr. Part No.89853093A
BrandSouriau
TWD19,459.00
Each
units
Positioner MicroComp - -
RS Stock No. 174-3164
Mfr. Part No.1-1729372-0
TWD9,824.00
Each
units
Anvil - - -
RS Stock No. 173-9630
Mfr. Part No.63819-0175
BrandMolex
TWD1,851.00
Each
units
Locator 207128 - 63819
RS Stock No. 876-2361
Mfr. Part No.525442-6
TWD7,526.00
Each
units
Plug Gauge - - -
RS Stock No. 343-2826
Mfr. Part No.TH592
BrandGlenair
TWD8,458.00
Each
units
Turret AF8 - -
RS Stock No. 864-7089
Mfr. Part No.456424-5
TWD6,252.00
Each
units
F Crimper HDM - -
RS Stock No. 864-6991
Mfr. Part No.1583659-1
TWD43,768.00
Each
units
Hydraulic Foot Pump - - -
RS Stock No. 864-3557
Mfr. Part No.58422-1
TWD693,665.00
Each
units
Crimping Head DYNA-CRIMP - 58422
RS Stock No. 693-1133
Mfr. Part No.09990000504
BrandHARTING
TWD16,942.00
Each
units
Positioner - - -
RS Stock No. 179-2467
Mfr. Part No.18.3801
TWD11,402.00
Each
units
Locator MES-CZ - -