RS PRO Toggle Switch, PCB Mount, On-On, SPDT, Solder Terminal, 20 V dc, 20 V ac
- RS Stock No.:
- 820-0532
- Manufacturer:
- RS PRO
Subtotal (1 unit)*
TWD509.00
(exc. GST)
TWD534.45
(inc. GST)
Stock information currently inaccessible - Please check back later
Units | Per unit |
|---|---|
| 1 + | TWD509.00 |
*price indicative
- RS Stock No.:
- 820-0532
- Manufacturer:
- RS PRO
Specifications
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | RS PRO | |
| Product Type | Toggle Switch | |
| Contact Configuration | SPDT | |
| Switch Operation | On-On | |
| Switch Contact Current | 400 mA | |
| Mount Type | PCB | |
| Terminal Type | Solder | |
| IP Rating | IP67 | |
| Contact AC Voltage | 20V ac | |
| Actuator Length | 18mm | |
| Contact DC Voltage | 20V dc | |
| Minimum Operating Temperature | -30°C | |
| Actuator Material | Brass | |
| Maximum Operating Temperature | 85°C | |
| Switch Configuration | SPDT | |
| Length | 16mm | |
| Height | 39.8mm | |
| Width | 14.48 mm | |
| Series | 100h | |
| Standards/Approvals | MIL-STD-202F | |
| Mechanical Life | 50000Cycles | |
| Select all | ||
|---|---|---|
Brand RS PRO | ||
Product Type Toggle Switch | ||
Contact Configuration SPDT | ||
Switch Operation On-On | ||
Switch Contact Current 400 mA | ||
Mount Type PCB | ||
Terminal Type Solder | ||
IP Rating IP67 | ||
Contact AC Voltage 20V ac | ||
Actuator Length 18mm | ||
Contact DC Voltage 20V dc | ||
Minimum Operating Temperature -30°C | ||
Actuator Material Brass | ||
Maximum Operating Temperature 85°C | ||
Switch Configuration SPDT | ||
Length 16mm | ||
Height 39.8mm | ||
Width 14.48 mm | ||
Series 100h | ||
Standards/Approvals MIL-STD-202F | ||
Mechanical Life 50000Cycles | ||
- COO (Country of Origin):
- TW
IP67 Sealed Miniature Toggle Switches - RS Series
These full sealed switches feature a double shell case for added mechanical strength and high electrical insulation. The switches have a two 'O' ring frontal seals that maintain the seal during operation. The rear of the switch is also fully sealed allowing full protection from flowing water.The contacts are suitable for both low level switching (10mA 50mV - 10μA, 5Vdc minimum) and power applications (3A @ 250Vac).
Related links
- RS PRO Toggle Switch On-On Solder Terminal 20 V ac
- KNITTER-SWITCH Toggle Switch On-On Solder Terminal 20 V ac
- KNITTER-SWITCH Toggle Switch On-Off-On Solder Terminal 20 V ac
- C & K Toggle Switch On-On Solder Terminal 20 V ac
- RS PRO Toggle Switch On-On-On Solder Terminal 112 V ac
- KNITTER-SWITCH Toggle Switch On-On Solder Terminal 20 V ac
- C & K Toggle Switch Latching Solder Terminal 20 V ac
- TE Connectivity Toggle Switch On-On Solder Terminal 20 V ac