Pepperl + Fuchs VBA-4E Series Connector Hood, 4 Port

RS Stock No.:: 623-7725
Mfr. Part No.:: 118533
Manufacturer:: Pepperl + Fuchs

Pepperl + Fuchs VBA-4E Series Connector Hood, 4 Port

The image is for reference only, please refer to product details and specifications

Subtotal (1 unit)*

TWD4,356.00

(exc. GST)

TWD4,573.80

(inc. GST)

FREE delivery for orders over NT$1,300.00

Stocked by manufacturer

Ready to ship from October 02, 2026

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 +	TWD4,356.00

*price indicative

RS Stock No.:: 623-7725
Mfr. Part No.:: 118533
Manufacturer:: Pepperl + Fuchs

Specifications

Product overview and Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Pepperl + Fuchs
	Product Type	Connector Hood
	Inlet Connection Type	Removable Terminals
	Number of Ports	4
	Maximum Operating Voltage	31.6V
	Series	VBA-4E
	Housing Material	Polyamide 66 Flame Retardant
	IP Rating	IP20
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	EN 61000-6-4:2001, EMC 2004/108/EC, EN 50295:1999, EN 60529:2000, EN 61131-2:2007, EN 61000-6-2:2001
	Output Type	M12 Connector
	Minimum Operating Voltage	26.5V

	Select all
	Brand Pepperl + Fuchs
	Product Type Connector Hood
	Inlet Connection Type Removable Terminals
	Number of Ports 4
	Maximum Operating Voltage 31.6V
	Series VBA-4E
	Housing Material Polyamide 66 Flame Retardant
	IP Rating IP20
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Standards/Approvals EN 61000-6-4:2001, EMC 2004/108/EC, EN 50295:1999, EN 60529:2000, EN 61131-2:2007, EN 61000-6-2:2001
	Output Type M12 Connector
	Minimum Operating Voltage 26.5V

RoHS Status: Exempt

COO (Country of Origin):: SG

AS-I Actuator/Sensor DIN Rail Modules

22.5mm width housing

Removable terminals

Available with a variety of inputs/outputs

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.

A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).

By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.

The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.

Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring

High data speed

Low cost installation

Intelligent diagnostics

Easy to learn and install

Highly flexible

Can connect to other fieldbus systems

User-friendly

Off-site pre-assembly and test

Easy maintenance

Faster on-site commissioning

Host or stand alone use

Able to use standard sensors and actuators (using modules)