RS PRO Fused Test Lead Kit, CAT III
- RS Stock No.:
- 204-599
- Manufacturer:
- RS PRO
Stock check temporarily unavailable - call for stock availability
Price (VAT excluded) Each
Was TWD1,813.00
You pay
TWD1,387.00
(exc. GST)
TWD1,456.35
(inc. GST)
Units | Per unit |
|---|---|
| 1 - 4 | TWD1,387.00 |
| 5 + | TWD1,141.00 |
- RS Stock No.:
- 204-599
- Manufacturer:
- RS PRO
- COO (Country of Origin):
- GB
RS Pro Fused Test Leads 1000V CAT III
A 1.2m fused test lead set from our RS PRO range offering a high degree of protection to the user when measuring on high energy circuits up to 1000V CAT III. The leads are available with either straight 4mm plugs with retractable shroud, or with right-angled shrouded plugs. Test leads for multimeters are used to test voltage, current, capacitance and other types of testing.
Supplied in a plastic wallet, this test lead kit is available with straight or right-angled 4mm plugs and is suitable for use with most multimeters and insulation testers.
204-583 - Fused right-angled test lead set
204-599 - Retractable Straight Plug
Before making any voltage measurements, check the continuity of the leads to ensure that the fuses are intact.
RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.
Supplied in a plastic wallet, this test lead kit is available with straight or right-angled 4mm plugs and is suitable for use with most multimeters and insulation testers.
204-583 - Fused right-angled test lead set
204-599 - Retractable Straight Plug
Before making any voltage measurements, check the continuity of the leads to ensure that the fuses are intact.
RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530.
Features and Benefits:
Each lead is fitted with a 500mA 1000V 50kA HRC fuse within totally touch proof integral fuse holders
High-quality silicone insulated cable, resistant to heat, chemicals, oils and abrasions, with yellow inner insulation to serve as a wear indicator
Large screw-in crocodile clips with a 20mm jaw opening with integral finger guards rated 600V CATIII
Strain relief is provided at each end of the leads.
Also available:
Thin fine insulated prods set 2627770 for use with fused test prods and multimeter test lead sets.
Shuttered lantern probe set 2627786 for use with fused test prods and multimeter test lead sets.
High-quality silicone insulated cable, resistant to heat, chemicals, oils and abrasions, with yellow inner insulation to serve as a wear indicator
Large screw-in crocodile clips with a 20mm jaw opening with integral finger guards rated 600V CATIII
Strain relief is provided at each end of the leads.
Also available:
Thin fine insulated prods set 2627770 for use with fused test prods and multimeter test lead sets.
Shuttered lantern probe set 2627786 for use with fused test prods and multimeter test lead sets.
Typical applications
Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.
Test and Measurement
Test and Measurement
A 1.2m fused test lead set offering a high degree of protection to the user when measuring on high energy circuits up to 1000V CAT III.
The leads are available with either straight 4mm plugs with retractable shroud, or with right angled shrouded plugs. Replacement fuses can be purchased please see RS Stock no. 161-1530.
The leads are available with either straight 4mm plugs with retractable shroud, or with right angled shrouded plugs. Replacement fuses can be purchased please see RS Stock no. 161-1530.
Safety Precautions
Each lead is fitted with a 500mA 1000V 50kA HRC fuse within totally touch proof integral fuse holders
High quality silicone insulated cable, resistant to heat, chemicals, oils and abrasions, with yellow inner insulation to serve as a wear indicator
Large screw-in crocodile clips with a 20mm jaw opening with integral finger guards rated 600V CATIII
Strain relief is provided at each end of the leads.
High quality silicone insulated cable, resistant to heat, chemicals, oils and abrasions, with yellow inner insulation to serve as a wear indicator
Large screw-in crocodile clips with a 20mm jaw opening with integral finger guards rated 600V CATIII
Strain relief is provided at each end of the leads.
Supplied in a plastic wallet, this test lead set is available with straight or right angled 4mm plugs and is suitable for use with most multimeters and insulation testers.
Thin fine insulated prods set 2627770 for use with fused test prods and multimeter test lead sets are also available
Shuttered lantern probe set 2627786 for use with fused test prods and multimeter test lead sets
Note
Right angled versions are not recommended for use with Megger BM100, BM101, Thurlby 1905, 1503, Fluke 8010, 8050, Wavetek DM25XL, DM93, DM98, AVO 8, AVO 2001 and ITT MX112 multimeters. For these models straight versions are more suitable.
Standards
GS38
Attribute | Value |
|---|---|
| Lead Type | Test Lead Kit |
| Connector Type | Straight Plug |
| Fused | Yes |
| Lead Length | 1.2m |
| Safety Category Voltage | 600, 1000V |
| Safety Category | CAT III 1000 V, CAT III 600V |
| Minimum Operating Temperature | -10°C |
| Maximum Operating Temperature | +150°C |
| Safety Category Level | CAT III |