RS PRO Magnetic Field Detector 0.3mT 1000V ac
- RS Stock No.:
- 375-5422
- Manufacturer:
- RS PRO

View this category
90 In CN stock for delivery within 2 working day(s) (local stock)
175 In Global stock for delivery within 6 working day(s)
Price (VAT excluded) Each
Was TWD1,469.00
You pay
TWD995.00
(exc. GST)
TWD1,044.75
(inc. GST)
units | Per unit |
1 - 4 | TWD995.00 |
5 + | TWD819.00 |
- RS Stock No.:
- 375-5422
- Manufacturer:
- RS PRO
RoHS Status: Not Applicable
- COO (Country of Origin):
- CN
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- CN
Product Details
Magnetic Field Indicator / Solenoid Tester
The tip of the Magnet Stick lights up when in the presence of a magnetic field. It responds to all kinds of magnetic fields from alternating current to direct current and permanent strong magnets.,A small test magnet is housed in the cap of the Magnet Stick to check that it is working correctly.
Features and Benefits:
Easy to use
Powerful red light indicator
Lightweight
Powerful red light indicator
Lightweight
Product Application Information
Testing operating solenoid valves in pneumatic and hydraulic control equipment.
Testing relays with coils and electrically controlled solenoid valves in all types of vehicles and machines.
Testing solenoid valves when servicing oil burners.
The test lamp lights immediately and without metallic contact where there is a magnetic field, for example an activated coil in a solenoid valve.
Testing relays with coils and electrically controlled solenoid valves in all types of vehicles and machines.
Testing solenoid valves when servicing oil burners.
The test lamp lights immediately and without metallic contact where there is a magnetic field, for example an activated coil in a solenoid valve.
Applications:
Checking the functionality of relays, contactors, solenoids and coils Testing solenoid valves in pneumatic and hydraulic equipment
Automotive relay fault finding
Air conditioning servicing
Fault finding
Testing solenoid valves when servicing oil burners
Automotive relay fault finding
Air conditioning servicing
Fault finding
Testing solenoid valves when servicing oil burners
What is a magnetic field detector?
A magnetic tester or detector such as the Magnet Stick, is an instrument that is able to detect magnetism, they are able to identify magnetic materials or fields.
What is a magnetic field?
It is a vector field and best describes the magnetic influence of electric charge in magnetic materials or relative motion. Measured usually by strength and direction, these vector quantities can be measured in Gauss or units of Tesla in SI units. They are otherwise known as a moving electrical charge often used in electromechanics and engineering within electric motors.
Note
This unit uses a magnetic read switch sensor. For applications requiring more sensitivity we recommend stock No. 719-0876 which uses a Hall Effect sensor.
Supplied with
Batteries fitted and an instruction leaflet.
Specifications
Attribute | Value |
Indicator Type | Magnetic Field |
Magnetic Sensitivity | 0.3mT |
Battery Type | AAA |
Power Source | Battery |
Safety Category | CAT III 1000 V |
Weight | 40g |
Diameter | 17mm |
Length | 152mm |
Maximum Detection Voltage | 1000V ac |
Maximum Operating Temperature | +50°C |
Safety Category Level | CAT III |
Minimum Operating Temperature | -10°C |
Safety Category Voltage | 1000V |