Fluke 28EX Handheld Digital Multimeter True RMS

Grab this multimeter from FLUKE when you want an all-in-one solution for electrical troubleshooting. It's a multitasker that measures current, voltage and temperature, as well as diode status, capacitance and frequency. As the unit also handles resistance and duty cycle, you'll have no need for other meters in your life. It's a breeze to carry in the field thanks to compact dimensions of 213.3 (L) x 100 (W) x 45.7mm (H). Simply pop three AAAs into the battery compartment and you're good to go. This device is tough enough for harsh environments as it's IP67-rated, meaning it's completely dust-tight and withstands immersion in water to a depth of one metre.

• Weighs just 567.8g for easy handling

• Power supply services

Yes. This multimeter has been tested for safe and reliable performance in explosive environments as it's not a source of ignition.

The Fluke 28II Ex is the most rugged intrinsically safe digital multimeter in the world. This one device equips you with all the testing and troubleshooting power you need, wherever you go. It meets your needs inside or outside ATEX zones 1, 2, 21 or 22. It means that there is no need to carry different meters for different areas. There is no need to worry about crossing through an Ex-required zone with a non-Ex rated instrument.

One tool equips you with all the testing and troubleshooting power you need wherever you go––inside or outside ATEX zones 1,2,21, or 22. No need to carry different meters for different areas, or worry about crossing through an Ex-required zone with a non-Ex rated instrument.

• Ex certification allows you to operate this digital multimeter into most Ex rated areas;• Tested for drops of up to 3 m;• Dustproof per IEC60529 IP6x;• Waterproof per IEC60529 IPx7;• 4 1/2 digit mode for precise measurements (20 000 Counts) ;• True RMS ac voltage and current for accurate measurement on non-linear signals;• Measures up to 1000 V and 10 A ac and dc (note that Ex zones require reduced measurements) ;• Low pass filter ensures accurate voltage and frequency measurements on variable speed motor drives (VSDs) ;• Frequency to 200 kHz and % duty cycle to help you diagnose VSDs and switching power supplies;• Resistance, continuity and diode test ;• 10 000 μF capacitance range for components and motor caps ;• Conductance measurements for high resistance or leakage tests;• Min/Max-Average and Peak capture to record transients and variations automatically ;• Relative mode to remove test lead interference on resistance measurements ;• Auto and manual ranging for maximum flexibility ;• Input Alert protects you by chirping and flashing Lead when leads are plugged into the wrong inputs;• Important extras keep you productive all day long in less than optimal conditions.;• Backlit keypad buttons provide extra visibility in poorly lit areas, even when you are wearing full PPE;• Large display digits and 2-level bright white backlight also increases visibility;• Long battery life – 400 hours typical without backlight (Alkaline);• Access to the separate battery compartment makes it easy to change batteries or fuses without jeopardizing instrument calibration.

• ISA-82.02.01;• CAN/CSA-C22.2 No. 61010-1-04 /UL61010-1:2004, and TUV 61010-1:2001;• CE

28II Ex I.S Certification: IECEx Ex ia IIC T4 Gb, Ex ia IIIC T130 °C Db, Ex ia I Ma