MPN

Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the tool-post. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.

What are the advantages of lathe tool holders?

Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.

Why use lathe tool holders?

There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.

They can change the angle of the tool bit.
They can change the level of overhang in the tool bit.
They can direct fluid to the work area.
They may deflect the tool bit away from the piece when an excessive load is added.

70 Products showing for Lathe Tool Holders & Inserts

1 of 4

Sort By

Compare Product Details

Results per page

In Stock Pramet, 4.76 mm Height, 95 ° Approach, 12.9 mm Length RS Stock No. 866-0495 Mfr. Part No. CNMG 120412E-R:T9335 Subtotal (1 box of 10 units) TWD5,461.00(exc. GST) TWD5,461.00/box Quantity	Pramet	95°	Lathe Part	-	-	-	-	12.9mm	-	4.76mm	-	-	-	-	-	12.7mm	-	-	-	4	-	-	ISO D, ISO m, ISO s, ISO p	Diamond
In Stock Pramet, 4.76 mm Height, 93 ° Approach, 16.5 mm Length RS Stock No. 866-0509 Mfr. Part No. TNMG 160408E-M:T9325 Subtotal (1 box of 10 units) TWD4,958.00(exc. GST) TWD4,958.00/box Quantity	Pramet	93°	Lathe Part	-	-	-	-	16.5mm	-	4.76mm	-	-	-	-	-	9.5mm	-	-	-	3	-	-	No	Triangular
Temporarily out of stock Pramet, 2.38 mm Height, 95 ° Approach, 6.4 mm Length RS Stock No. 866-0427 Mfr. Part No. CCMT 060204E-FM:T9315 Subtotal (1 box of 10 units) TWD3,669.00(exc. GST) TWD3,669.00/box Quantity	Pramet	95°	Lathe Part	-	-	-	-	6.4mm	-	2.38mm	-	-	-	-	-	12.7mm	-	-	-	4	-	-	ISO s, ISO p, ISO D, ISO m	Diamond
In Stock Pramet for Use with XLCFN 32, 90 ° Approach, 110mm Length RS Stock No. 866-0350 Mfr. Part No. 32-DU 2532 Subtotal (1 unit) TWD12,641.00(exc. GST) TWD12,641.00/unit Quantity	Pramet	90°	Lathe Part	-	-	XLCFN 32	-	-	110mm	-	-	-	-	-	-	-	-	-	-	-	25mm	32mm	ISO	-
In Stock Pramet Positive Turning Insert for Use with TT310, 2.38 mm Height, 15 ° Approach, 2.38mm Length RS Stock No. 263-7746 Mfr. Part No. CCMT 060202E-UR:TT310 Subtotal (1 box of 10 units) TWD3,947.00(exc. GST) TWD3,947.00/box Quantity	Pramet	15°	Lathe Part	Positive Turning Insert	-	TT310	-	-	2.38mm	-	2.38mm	Fine Spark	-	-	-	-	-	-	-	-	-	-	No	-
In Stock Pramet, 4.76 mm Height, 95 ° Approach, 12.9 mm Length RS Stock No. 866-0489 Mfr. Part No. CNMG 120408E-M:T9335 Subtotal (1 box of 10 units) TWD6,325.00(exc. GST) TWD6,325.00/box Quantity	Pramet	95°	Lathe Part	-	-	-	-	12.9mm	-	4.76mm	-	-	-	-	-	-	-	-	-	4	-	-	ISO	Diamond
In Stock Pramet, 4.76 mm Height, 95 ° Approach, 12.9 mm Length RS Stock No. 866-0477 Mfr. Part No. CNMG 120408E-FM:T9325 Subtotal (1 box of 10 units) TWD5,542.00(exc. GST) TWD5,542.00/box Quantity	Pramet	95°	Lathe Part	-	-	-	-	12.9mm	-	4.76mm	-	-	-	-	-	-	-	-	-	4	-	-	ISO	Diamond
In Stock Pramet, 2.38 mm Height, 93 ° Approach, 7.8 mm Length RS Stock No. 866-0455 Mfr. Part No. DCMT 070204E-FM:T9325 Subtotal (1 box of 10 units) TWD4,191.00(exc. GST) TWD4,191.00/box Quantity	Pramet	93°	Lathe Part	-	-	-	-	7.8mm	-	2.38mm	-	-	-	-	-	-	-	-	-	4	-	-	ISO	Diamond
Temporarily out of stock Pramet, 2.38 mm Height, 95 ° Approach, 6.4 mm Length RS Stock No. 866-0420 Mfr. Part No. CCMT 060204E-FM:T9325 Subtotal (1 box of 10 units) TWD3,565.00(exc. GST) TWD3,565.00/box Quantity	Pramet	95°	Lathe Part	-	-	-	-	6.4mm	-	2.38mm	-	-	-	-	-	12.7mm	-	-	-	4	-	-	ISO s, ISO p, ISO D, ISO m	Diamond
In Stock Pramet, 3.1 mm Height, 90 ° Approach, 3.1 mm Length RS Stock No. 136-3972 Mfr. Part No. LFMX 3.1-.20TNF2:T8330 (X10) Subtotal (1 pack of 10 units) TWD6,404.00(exc. GST) TWD640.40/unit Quantity	Pramet	90°	Lathe Part	-	-	-	3.1mm	3.1mm	-	3.1mm	-	Bright	0.2mm	-	-	-	-	-	Aluminium	3	-	-	No	-
In Stock Pramet Lathe Tool Holder for Use with DCMT 11T3, 16 mm Height, 93 ° Approach, 100mm Length RS Stock No. 866-0335 Mfr. Part No. SDJCR 1616 H 11 Subtotal (1 unit) TWD5,693.00(exc. GST) TWD5,693.00/unit Quantity	Pramet	93°	Lathe Part	Lathe Tool Holder	-	DCMT 11T3	-	-	100mm	-	16mm	-	-	Right	20mm	-	9.53mm	55° Rhombus	-	-	16mm	16mm	No	-
In Stock Pramet, 4.76 mm Height, 93 ° Approach, 16.5 mm Length RS Stock No. 866-0515 Mfr. Part No. TNMG 160412E-R:T9335 Subtotal (1 box of 10 units) TWD5,511.00(exc. GST) TWD5,511.00/box Quantity	Pramet	93°	Lathe Part	-	-	-	20mm	16.5mm	-	4.76mm	-	Bright	-	-	-	-	-	-	Aluminium	3	-	-	ISO	Triangular
In Stock Pramet, 3.18 mm Height, 16.5 mm Length RS Stock No. 866-0521 Mfr. Part No. TPMR 160308E-47:T9325 Subtotal (1 box of 10 units) TWD5,185.00(exc. GST) TWD5,185.00/box Quantity	Pramet	-	Lathe Part	-	-	-	3.18mm	16.5mm	-	3.18mm	-	Bright	-	-	-	-	-	-	Aluminium	3	-	-	ISO m, ISO s, ISO p, ISO D	Triangular
In Stock Pramet, 3.97 mm Height, 93 ° Approach, 11.6 mm Length RS Stock No. 866-0467 Mfr. Part No. DCMT 11T308E-FM:T9325 Subtotal (1 box of 10 units) TWD5,363.00(exc. GST) TWD5,363.00/box Quantity	Pramet	93°	Lathe Part	-	-	-	-	11.6mm	-	3.97mm	-	-	-	-	-	9.5mm	-	-	-	4	-	-	ISO s, ISO p, ISO D, ISO m	Diamond
Stocked by manufacturer Pramet, 3.47 mm Height, 90 ° Approach, 16.5 mm Length RS Stock No. 136-8719 Mfr. Part No. TN 16ER175M:T8030 Subtotal (1 pack of 5 units) TWD4,439.00(exc. GST) TWD887.80/unit Quantity	Pramet	90°	Lathe Part	-	-	-	-	16.5mm	-	3.47mm	-	-	-	-	-	-	-	-	-	-	-	-	No	Triangular
Temporarily out of stock Pramet Lathe Tool Holder for Use with CC Inserts, 6 mm Height, 95 ° Approach, 100mm Length RS Stock No. 866-0556 Mfr. Part No. A08H-SCLCR 06 Subtotal (1 unit) TWD6,738.00(exc. GST) TWD6,738.00/unit Quantity	Pramet	95°	Lathe Part	Lathe Tool Holder	-	CC Inserts	-	-	100mm	-	6mm	-	-	Right	-	-	6.35mm	80° Rhombus	Steel	-	7.2mm	7.6mm	No	-
In Stock Pramet, 4.76 mm Height, 95 ° Approach, 12.9 mm Length RS Stock No. 136-3987 Mfr. Part No. CNMG 120408E-SM:T7325 Subtotal (1 pack of 10 units) TWD5,620.00(exc. GST) TWD562.00/unit Quantity	Pramet	95°	Lathe Part	-	-	-	-	12.9mm	-	4.76mm	-	-	-	-	-	12.7mm	-	-	-	4	-	-	No	Diamond
In Stock Pramet DCLNR/L for Use with CN/CNM Inserts, 25 mm Height, 95 ° Approach RS Stock No. 866-0552 Mfr. Part No. DCLNR 2525 M 12 Subtotal (1 unit) TWD4,487.00(exc. GST) TWD4,487.00/unit Quantity	Pramet	95°	Lathe Part	DCLNR/L	-	CN/CNM Inserts	-	-	-	-	25mm	-	-	-	-	-	12.7mm	CNM.	-	4	-	-	ISO	-
In Stock Pramet, 4.76 mm Height, 93 ° Approach, 6.5 mm Length RS Stock No. 866-0394 Mfr. Part No. WNMG 060412E-NM:T9325 Subtotal (1 box of 10 units) TWD5,742.00(exc. GST) TWD5,742.00/box Quantity	Pramet	93°	Lathe Part	-	-	-	-	6.5mm	-	4.76mm	-	-	-	-	-	-	-	-	-	-	-	-	ISO s, ISO p, ISO m, ISO D	-
In Stock Pramet Sclcr/L for Use with CCMT 09T3, 16 mm Height, 95 ° Approach, 150mm Length RS Stock No. 866-0332 Mfr. Part No. S16M-SCLCR 09-A Subtotal (1 unit) TWD7,410.00(exc. GST) TWD7,410.00/unit Quantity	Pramet	95°	Lathe Part	Sclcr/L	-	CCMT 09T3	-	-	150mm	-	16mm	-	-	-	-	-	9.53mm	CC	-	-	14.5mm	15mm	ISO	-

Lathe Tool Holders & Inserts

What are the advantages of lathe tool holders?

Why use lathe tool holders?

70 Products showing for Lathe Tool Holders & Inserts

Related links