FTDI Chip, USB to Serial UART, 1-Channel 3 Mbps, 5V, USB to UART, 1.8 V, 28-Pin SSOP
- RS Stock No.:
- 275-0035
- Mfr. Part No.:
- FT232RNL-REEL
- Manufacturer:
- FTDI Chip
The image is for reference only, please refer to product details and specifications
Subtotal (1 reel of 2000 units)*
TWD201,600.00
(exc. GST)
TWD211,680.00
(inc. GST)
FREE delivery for orders over NT$1,300.00
Temporarily out of stock
- 4,000 unit(s) shipping from November 04, 2026
- Plus 8,000 unit(s) shipping from December 02, 2026
- Plus 6,000 unit(s) shipping from December 30, 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit | Per Reel* |
|---|---|---|
| 2000 + | TWD100.80 | TWD201,600.00 |
*price indicative
- RS Stock No.:
- 275-0035
- Mfr. Part No.:
- FT232RNL-REEL
- Manufacturer:
- FTDI Chip
Specifications
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FTDI Chip | |
| Maximum Data Rate | 3Mbps | |
| Product Type | USB to Serial UART | |
| Number of Transceivers | 1 | |
| USB Specification | USB 2.0 | |
| Sub Type | USB Controller | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 5V | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Supported Protocols | USB to UART | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Series | FT232RNL | |
| Automotive Standard | No | |
| Supply Current | 7mA | |
| Select all | ||
|---|---|---|
Brand FTDI Chip | ||
Maximum Data Rate 3Mbps | ||
Product Type USB to Serial UART | ||
Number of Transceivers 1 | ||
USB Specification USB 2.0 | ||
Sub Type USB Controller | ||
Power Supply Type Single | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 5V | ||
Package Type SSOP | ||
Pin Count 28 | ||
Supported Protocols USB to UART | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Series FT232RNL | ||
Automotive Standard No | ||
Supply Current 7mA | ||
The FTDI Chip USB UART IC is a USB to serial UART interface device which simplifies USB to serial designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operate efficiently with a USB host controller by using as little as possible of the total USB bandwidth available.
AVCC filtering
RoHS compliant
POR and LDO regulator
Supports synchronous bit bang mode
New FTDI Chip ID security dongle feature
Signal inversion and drive strength selection
Related links
- Tedea Huntleigh Low Profile Load Cell Compression Measure
- 2961105 | Phoenix Contact PCB Mount Power Relay 6A Switching Current, SPDT
- RS PRO Black 3 mm² Hook Up Wire 30m
- ABB D45 Pluto Series Safety Controller 6 Safety Outputs, 24 V dc
- TE Connectivity Coaxial Cable RG400 Coaxial, Unterminated
- Fluke 289 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- RS PRO RS-172 Temperature & Humidity Data Logger
- RS PRO I/O Extension Module for Use with RS PRO Logic Modules Digital