FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 76-Pin QFN
- RS Stock No.:
- 146-6840P
- Mfr. Part No.:
- FT601Q-B-T
- Manufacturer:
- FTDI Chip
The image is for reference only, please refer to product details and specifications
Bulk discount available
Subtotal 65 units (supplied in a tray)*
TWD18,980.00
(exc. GST)
TWD19,929.00
(inc. GST)
FREE delivery for orders over NT$1,300.00
In Stock
- Plus 2,510 unit(s) shipping from January 26, 2026
- Plus 2,080 unit(s) shipping from February 25, 2026
- Plus 780 unit(s) shipping from April 22, 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 65 + | TWD292.00 |
*price indicative
- RS Stock No.:
- 146-6840P
- Mfr. Part No.:
- FT601Q-B-T
- Manufacturer:
- FTDI Chip
Specifications
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FTDI Chip | |
| Maximum Data Rate | 5Gbps | |
| Product Type | USB Bridge IC | |
| Number of Transceivers | 2 | |
| Sub Type | Transceiver | |
| USB Specification | USB 2.0, USB 3.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 3.6V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 76 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB 3.0, USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Width | 9.1 mm | |
| Series | FT601Q | |
| Height | 0.95mm | |
| Length | 9.1mm | |
| Automotive Standard | No | |
| Supply Current | 70mA | |
| Select all | ||
|---|---|---|
Brand FTDI Chip | ||
Maximum Data Rate 5Gbps | ||
Product Type USB Bridge IC | ||
Number of Transceivers 2 | ||
Sub Type Transceiver | ||
USB Specification USB 2.0, USB 3.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 3.6V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 76 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB 3.0, USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Width 9.1 mm | ||
Series FT601Q | ||
Height 0.95mm | ||
Length 9.1mm | ||
Automotive Standard No | ||
Supply Current 70mA | ||
Enabling Faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.