FTDI Chip FT601Q-B-T, USB Bridge IC, 2-Channel, 480 Mbps, 5Gbit/s, USB 2.0, USB 3.0, 3.3 V, 76-Pin QFN
- RS Stock No.:
- 146-6840
- Mfr. Part No.:
- FT601Q-B-T
- Manufacturer:
- FTDI Chip
Temporarily out of stock - back order for despatch 06/08/2024, delivery within 6 working days
Added
Price (VAT excluded) Each
TWD283.00
(exc. GST)
TWD297.15
(inc. GST)
| Units | Per unit |
| 1 - 64 | TWD283.00 |
| 65 + | TWD277.00 |
- RS Stock No.:
- 146-6840
- Mfr. Part No.:
- FT601Q-B-T
- Manufacturer:
- FTDI Chip
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Enabling faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
|---|---|
| Number of Transceivers | 2 |
| Data Rate | 480 Mbps, 5Gbit/s |
| IC Type | Transceiver IC |
| Protocols Supported | USB 2.0, USB 3.0 |
| Power Supply Type | Single |
| ESD Protection | Yes |
| Typical Single Supply Voltage | 3.3 V |
| Mounting Type | Surface Mount |
| Package Type | QFN |
| Pin Count | 76 |
| Dimensions | 9.1 x 9.1 x 0.95mm |
| Height | 0.95mm |
| Length | 9.1mm |
| Maximum Operating Temperature | +85 °C |
| Width | 9.1mm |
| Minimum Operating Temperature | -40 °C |