Recently searched

    ADAFRUIT INDUSTRIES, DPI TFT Kippah

    RS Stock No.:
    124-5488
    Mfr. Part No.:
    2454
    Manufacturer:
    ADAFRUIT INDUSTRIES
    ADAFRUIT INDUSTRIES
    View this category
    1 In CN stock for delivery within 2 working day(s) (local stock)
    27 In Global stock for delivery within 6 working day(s)
    Add to Basket
    units

    Added

    Price (VAT excluded) Each

    TWD514.00

    (exc. GST)

    TWD539.70

    (inc. GST)

    unitsPer unit
    1 - 4TWD514.00
    5 - 9TWD478.00
    10 +TWD473.00
    RS Stock No.:
    124-5488
    Mfr. Part No.:
    2454
    Manufacturer:
    ADAFRUIT INDUSTRIES

    Product overview and Technical data sheets


    Legislation and Compliance


    Product Details

    Adafruit DPI TFT Kippah for Raspberry Pi


    This Adafruit DPI Kippah has a TFT panel which is connected to a Raspberry Pi without the use of on HDMI decoder. With a little software configuration, what normally would go out the HDMI port, now will come up on a nice little flat screen.


    What is it compatible with?


    Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero


    A little bit about the screen


    This Kippah has not got a touch screen, however, you will get a sleek ultra-fast 18-bit colour display with optional touch support. When tested the results showed that this can be used with 5’’and 7’’ displays at 800x480. Kippah screen is what is called ’native’. What does that mean? It means that it gets all the graphics acceleration capabilities as well as immediate refresh which you would normally get from an HDMI display.


    What is the advantage of Kippah?


    This add on board uses almost every pin available on the Raspberry Pi. Pins are hardcoded, so they cannot be moved or rearranged. UART RX/TX pins (no console cable) and standard user I2Cpins are not included. Same as the EEPROM I2C pins, or hardware SPI pins.
    Pins used:
    • GPIO 2 through 21 inclusive
    • #22, #23, #24, #25, #26 and #27
    • USB port
    Display replaces the HDMI/NTSC output, therefore DPI HAT and HDMI won’t be working simultaneously and you won’t be able to switch between the two.


    Specifications:


    This single-display module is suitable for use in Multimedia Player products. The LCD adopts one backlight with High brightness 12-lamps white LED.

    LCD:
    • Amorphous-TFT 5.0 inch display, transmissive, normally white type
    • 800(RGB) x 480 dots Matrix
    • Narrow-contact ledge technique
    • LCD Driver IC: HX8264D x1 & HX8664B x1
    • RGB interface
    • Video signal interface: Parallel RGB or serial


    Not included: TFT display, USB micro-B cable, FPC Extension cable, bent wire stand and Raspberry Pi.



    Specifications

    AttributeValue
    Product NameDPI TFT Kippah
    1 In CN stock for delivery within 2 working day(s) (local stock)
    27 In Global stock for delivery within 6 working day(s)
    Add to Basket
    units

    Added

    Price (VAT excluded) Each

    TWD514.00

    (exc. GST)

    TWD539.70

    (inc. GST)

    unitsPer unit
    1 - 4TWD514.00
    5 - 9TWD478.00
    10 +TWD473.00