Better World
4 CO Push Button Pendant Station
- RS Stock No.:
- 609-9955
- Mfr. Part No.:
- XACA4713
- Manufacturer:
- Schneider Electric
10 In Global stock for delivery within 6 working day(s)
23 In Global stock for delivery within 6 working day(s)
Added
Price (VAT excluded) Each
Was TWD20,364.00
You pay
TWD17,309.00
(exc. GST)
TWD18,174.45
(inc. GST)
| Units | Per unit |
| 1 + | TWD17,309.00 |
Better World
Our Better World range features products that make it easy for you to make a greener product choice you can trust. Click here to find out more.
- RS Stock No.:
- 609-9955
- Mfr. Part No.:
- XACA4713
- Manufacturer:
- Schneider Electric
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- CZ
Product Details
Standard Pushbutton
Created and designed for predominantly crane applications, Schneider Electrics push-button pendant station provides a covering case for the internal push button. This unit is a simple yet effective mechanical switch which is commonly used to control one function within a machine or device.
Common Applications of a Push Button Pendants Station
Pre assembled double insulated crane pendants for single speed motor applications
Mechanically interlocked between pairs
For light duty Pendant switch see also Stock no 507481
Mechanically interlocked between pairs
For light duty Pendant switch see also Stock no 507481
- Pre-assembled, ready to go
- Double insulated
- Commonly used for single speed motor applications
- Mechanically interlocked between pairs
Schneider Electric Push Button Pendant Station - XACA4713
Forming part of Schneider Electrics Harmony XAC range, this pendant features four push-buttons and one emergency stop button.
Features & Benefits
- The control button type of the buttons are - third pushbutton 1 NO right - slow, stop pushbutton Ø 40 mm 1 NC - latching, second pushbutton 1 NO lower -slow, fourth pushbutton 1 NO left - slow and first pushbutton 1 NO raise - slow
- With mechanical interlocking
- Aesthetically pleasing, finished with bright yellow colour, making it easy to locate
- Mechanically durable up to 1000000 cycles
- The cable entry has a rubber sleeve with stepped entry, the cable outer diameter is 0.31...1.02 in (8...26 mm)
- This pendant control station has a conventional enclosed thermal current of 10A
- The unit features an ingress protection rating of IP65, this means that the pendant control station is rated as dust tight and is protected against water projected from a nozzle
- Shock-resistant of 100gn conforming to EIC 60068-2-27
- Features a rated insulation voltage of 600V (degree of pollution:3) which conforms to IEC 60947-1
- The rated impulse withstand voltage is 6 kV which conforms to IEC 60947-1
Schneider Electric - Push Buttons
Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.
Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support
Specifications
Attribute | Value |
|---|---|
| Contact Configuration | 4 CO |
| IP Rating | IP65 |
| Terminal Type | Screw |
| Minimum Operating Temperature | -25°C |
| Maximum Operating Temperature | +70°C |
| Better World Verification | Green Premium |
| Better World Product | Yes |