Phoenix Contact 5.08mm Pitch 10 Way Pluggable Terminal Block, Plug, Cable Mount, Screw Termination

Classic COMBICON MSTB 2,5 5.08 mm pitch plug-in cable mount terminal block connectors. The terminals feature a 0.2 mm2 to 2.5 mm2 screw connection that forms a standard plug-in system for 320 V (III/2).

• Screw connection
• Well-known connection principle allows worldwide use
• Low temperature rise, thanks to maximum contact force

Want a single hub to house those all-important connections on your PCB? Put your wires together in one place with this pluggable terminal block from Phoenix Contact. It mounts directly onto a board and takes in 10 connecting cables to streamline your setup.
Thanks to screw connection and tension sleeves, installation is a walk in the park. Simply strip and expose 7mm of wire and crimp it into a ferrule. Use a screwdriver to secure the connector in the block, and you're good to go. The copper contacts will then zip signals along at rapid-fire speeds. There's no need to worry about corrosion in damp or humid settings as each contact is coated in protective tin.

• Small size of 18.3 (L) x 50.8 (W) x 15mm (H) suits systems where space is tight
• Wires can safely be inserted and withdrawn up to 25 times for repeated use
• Requires 6N to remove wires, making accidental loosening unlikely
• Safe to use in challenging locations, thanks to an operating temperature range between -40°C and +70°C