PicoScope 3000 Series, 200 MHz PC Based Oscilloscope 4-Channel

RS Stock No.:: 846-3428
Distrelec Article No.:: 300-18-075
Mfr. Part No.:: PicoScope 3406D
Manufacturer:: Pico Technology

PicoScope 3000 Series, 200 MHz PC Based Oscilloscope 4-Channel

View all Oscilloscopes

Currently unavailable

We don't know if this item will be back in stock, RS intend to remove it from our range soon.

RS Stock No.:: 846-3428
Distrelec Article No.:: 300-18-075
Mfr. Part No.:: PicoScope 3406D
Manufacturer:: Pico Technology

Specifications

Product overview and Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Pico Technology
	Product Type	Oscilloscope
	Bandwidth	200MHz
	Number of Channels	4
	Model Number	PicoScope 3406D
	Oscilloscope Type	PC Based
	Interface Type	CAN, IIC, LIN, RS232, SPI, UART, USB
	Series	PicoScope 3000
	Width	170mm
	Length	190mm
	Height	40mm
	Standards/Approvals	RoHS, WEEE
	Power Source	USB
	Vertical Resolution	8 bit
	Minimum Vertical Sensitivity	4mV/div
	Maximum Time Base	5000s/div
	Rise Time	1.75ns
	Minimum Time Base	500ps/div
	Maximum Vertical Sensitivity	4V/div

	Select all
	Brand Pico Technology
	Product Type Oscilloscope
	Bandwidth 200MHz
	Number of Channels 4
	Model Number PicoScope 3406D
	Oscilloscope Type PC Based
	Interface Type CAN, IIC, LIN, RS232, SPI, UART, USB
	Series PicoScope 3000
	Width 170mm
	Length 190mm
	Height 40mm
	Standards/Approvals RoHS, WEEE
	Power Source USB
	Vertical Resolution 8 bit
	Minimum Vertical Sensitivity 4mV/div
	Maximum Time Base 5000s/div
	Rise Time 1.75ns
	Minimum Time Base 500ps/div
	Maximum Vertical Sensitivity 4V/div

COO (Country of Origin):: GB

PicoScope 3000 Series Oscilloscope, 200MHz Bandwidth, 4 Channels - PicoScope 3406D

This oscilloscope is a PC‑based diagnostic instrument designed for waveform capture and analysis via a USB connection. It is powered from the USB port and interfaces with multiple serial buses, enabling signal measurement and protocol decoding in laboratory and field environments. The unit provides a balance of timebase and vertical control suitable for transient and steady‑state signal inspection without autonomous display hardware.

Features and Benefits:

• 200MHz bandwidth for capturing high‑frequency signals
• 4‑channel input for simultaneous multi‑signal observation
• 500ps/div minimum timebase for fine temporal resolution
• 8‑bit vertical resolution for consistent amplitude quantisation
• 1.75ns rise time to resolve fast signal edges

Applications

• Suitable for automotive bus diagnostics including CAN and LIN
• Ideal for embedded systems debugging with I2C and SPI
• Used for serial communications analysis of RS232 and UART
• Can be used for laboratory signal characterisation via USB
• Used with PC software for portable field measurements

What power source is required for operation?

It is powered directly from the host USB port, so no external supply is needed.

Which serial protocols can it Interface with?

It supports CAN, I2C, LIN, RS232, SPI and UART connections for protocol‑level inspection.

What is the maximum selectable timebase range?

The timebase spans down to 500ps/div and up to 5000s/div to cover fast transients and long‑duration signals.

How Compact is the unit for transport?

The instrument measures 40 mm high, 170 mm wide and 190 mm long, facilitating portable use.