Teledyne LeCroy MCX Series RP2060 Oscilloscope Probe, Power Rail Type, 2GHz, 1.2xdB, Coaxial Connector
- RS Stock No.:
- 264-1592
- Mfr. Part No.:
- RP2060
- Manufacturer:
- Teledyne LeCroy
Temporarily out of stock - back order for despatch 23/08/2024, delivery within 6 working days
Added
Price (VAT excluded) Each
TWD261,909.00
(exc. GST)
TWD275,004.45
(inc. GST)
Units | Per unit |
1 + | TWD261,909.00 |
- RS Stock No.:
- 264-1592
- Mfr. Part No.:
- RP2060
- Manufacturer:
- Teledyne LeCroy
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- US
Product Details
Teledyne LeCroy, Power/Voltage Rail Probe 2 GHz bandwidth
The RP4060 and RP2060 probes are designed specifically to probe low-impedance DC power/voltage rails. Low attenuation means a lownoise view of small signal variations at high frequency, while the probes built-in offset of up to ±60V enables compensation for the rails DC voltage. The probes high DC input impedance eliminates loading of the low-impedance DC rail.
2 GHz Bandwidth
±60 V Offset Capability
50 kΩ DC Input Impedance
±800 mV Dynamic Range
1.2x Attenuation for low additive noise
±60 V Offset Capability
50 kΩ DC Input Impedance
±800 mV Dynamic Range
1.2x Attenuation for low additive noise
MCX terminated cable with wide variety of connections:
Solder-in (4 GHz)
Coaxial Cable to U.FL receptacle (3 GHz)
MCX PCB Mount (4 GHz)
Browser (500 MHz)
Coaxial Cable to U.FL receptacle (3 GHz)
MCX PCB Mount (4 GHz)
Browser (500 MHz)
Large Offset Range
Permits the DC signal to be displayed in the vertical center of the oscilloscope grid with a high-sensitivity gain setting.
Low Attenuation and Noise
The probe attenuation is a nominal 1.2x coupled to the oscilloscope at DC 50 Ω. This keeps additive noise to a minimum, and makes it exceptionally useful with Teledyne LeCroys 12-bit High Definition oscilloscopes for lowest noise at highest sensitivity gain settings.
High DC Input Impedance
50 kΩ input impedance at DC effectively eliminates probe loading on the DC power/voltage rail and provides for more accurate measurements and signal fidelity.
Applications
Automotive, Power Application, Motor Drive Development, Product Design Application
Specifications
Attribute | Value |
---|---|
Probe Type | Power Rail |
Attenuation | 1.2xdB |
Bandwidth | 2GHz |
Maximum Common Mode Input Voltage | ±60V |
Connector Type | Coaxial |
Model Number p | RP2060 |
Series | MCX |