Pilz Transponder Non-Contact Safety Switch, 24V dc, Plastic Housing, M12
- RS Stock No.:
- 918-6667
- Mfr. Part No.:
- 542011
- Manufacturer:
- Pilz
Temporarily out of stock - back order for despatch 28/05/2024, delivery within 6 working days
Added
Price (VAT excluded) Each
TWD7,978.00
(exc. GST)
TWD8,376.90
(inc. GST)
| Units | Per unit |
| 1 + | TWD7,978.00 |
Alternatives
This product is not currently available. Here are our alternative recommendations.
- RS Stock No.
- 918-6655
Price (VAT excluded) Each
Was TWD6,867.00
You pay
TWD4,703.00
(exc. GST)
TWD4,938.15
(inc. GST)
- RS Stock No.:
- 918-6667
- Mfr. Part No.:
- 542011
- Manufacturer:
- Pilz
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- CH
Product Details
PSENcode Slim Non-Contact Safety Switch, Coded
The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.
Features and Benefits
Transponder technology for presence detection
Coded switch
Dual-channel operation
2 safety inputs for series connection of multiple safety switches
2 safety outputs
Safety Device Diagnostics (SDD)
Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters
Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
Signal output/diagnostic output Y32 for Safety Device Diagnostics
LED display for state of actuator detection, state of the inputs and supply voltage/fault
IP66 / IP67 protection
Coded switch
Dual-channel operation
2 safety inputs for series connection of multiple safety switches
2 safety outputs
Safety Device Diagnostics (SDD)
Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters
Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
Signal output/diagnostic output Y32 for Safety Device Diagnostics
LED display for state of actuator detection, state of the inputs and supply voltage/fault
IP66 / IP67 protection
PSEN cs5.11 (stock no. 918-6667)
1 actuation direction with 3 approach directions: square marking for normal operating distance
M12 8 pole male connector
30 N holding force
M12 8 pole male connector
30 N holding force
PSEN cs5.1p (stock no. 918-6661)
4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance
M8 8 pole male connector
M8 8 pole male connector
Caution
The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing.
Standards
EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4.
Approvals
CE, TÜV, UL/cUL, FCC, IC, ECOLAB.
Supplied with
Actuator.
Specifications
Attribute | Value |
|---|---|
| Supply Voltage | 24V dc |
| Housing Material | Plastic |
| Connection Type | M12 |
| Actuator Type | Coded |
| Safety Category | 4 |
| Sensor Principle | Transponder |
| Actuator Included | Yes |
| Range | PSENcode |
| IP Rating | IP66, IP67 |
| Length | 101.6mm |
| Width | 26.4mm |
| Depth | 19mm |