RS PROMultimeter Test Lead Test Lead Kit, CAT III 600 V

  • RS Stock No. 731-5277
  • Manufacturer RS PRO
Product overview and Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Multimeter Lead Set in Pouch

Practical lead sets supplied in a durable grey pouch with attractive yellow piping. Standard Set has a wide range of accessories for taking measurements in most situations. Fused Set has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard. Replacement fuses can be purchased please see RS Stock no. 161-1530. Thin fine insulated prods set 2627770 for use with fused test prods and multimeter test lead sets are also available.
Shuttered lantern probe set 2627786 for use with fused test prods and multimeter test lead sets.

Contents Standard Set

2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black), extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA.

Also available:
Thin fine insulated prods set 262-7770 for use with fused test prods and multimeter test lead sets
Shuttered lantern probe set 262-7786 for use with fused test prods and multimeter test lead sets.

Typical applications
Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test.
Test and Measurement

Safety Precautions
Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.


IEC 1010 Cat III 600V


  • Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance.
Attribute Value
Lead Type Test Lead Kit
Connector Type Crocodile Clip, Right Angle Plug, Spring Hook, Straight Plug
Lead Length 1.2m
Safety Category Voltage 600V
Safety Category CAT III 600 V
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Safety Category Level CAT III
270 In stock for delivery within 6 working days
Price (VAT excluded) Each
TWD 1,658.00
(exc. GST)
TWD 1,741.00
(inc. GST)
Per unit
1 +