Pomona 1632758 Test Lead

Brought to you by Pomona, a set of Multimeter test leads. Supplied as a red and a black version, these are equipped with a 2 mm test probe and a banana plug. The body of the probe, like the banana plug, is moulded directly onto the conductor in order to improve the robust nature of the accessory. All models are highly reliable and excellent quality.

• 2 Colours (Red & Black)
• Propylene and Santoprene body
• Easy to use
• 2 mm test probes (connectors)

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Pomona, each probe provides much-needed precision.

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.

CEI 1010 1000 V cat. III

Take a good look at your circuits with these multimeter leads from Pomona. Their nickel-plated brass tips efficiently conduct electricity, keeping power moving through your setup for reliable testing. As the probes tackle voltages up to 1000V, they carry intense loads without a hitch to work with many everyday power supplies. Hooking the products up to regulation multimeters is no issue, thanks to their widely compatible sheathed banana plug connectors. With their stranded wires, the leads easily flex to test components in hard-to-reach areas.

• Ergonomic rubber grip for comfortable hold during long work sessions
• Stands up to surge voltages of 6kV, reducing the risk of damage from power faults
• Nickel-plated copper plug spring to minimise wear from repeat connections
• PP probe insulation, cutting exposure to dangerous loads
• Colour-coded probes and leads match multimeter ports for handy identification

• Laboratory testing
• Logistics industry
• Processing plants

The products have a colour-coded wear indicator along their silicone length, alerting you as soon as your kit needs replacing.

Yes, these leads come with protective probe caps to safely work on power distribution networks for versatility.