Megger RCDT320 AU, RCD Test Type DC, RCD Test Current 1000 mA

The image is for reference only, please refer to product details and specifications

View all Loop & RCD Testers
Currently unavailable
Sorry, we don't know when this will be back in stock.
RS Stock No.:
163-974
Mfr. Part No.:
RCDT320 AU
Manufacturer:
Megger
Find similar products by selecting one or more attributes.
Select all

Brand

Megger

RCD Test Type

DC

RCD Test Current

1000mA

Display Type

LCD

Battery Type

Rechargeable Nickel-Cadmium, Rechargeable Ni-MH

Minimum Operating Temperature

-5°C

Maximum Operating Temperature

40°C

Power Source

Battery

Length

203mm

Standards/Approvals

No

Weight

980g

Width

148 mm

Height

78mm

Safety Category Voltage

300V

Plug Type

AUS

RoHS Status: Not Applicable

COO (Country of Origin):
GB

RCDT310 & RCDT320 RCD Testers


Two RCD testers that comply with EN61557 for testing, measuring or monitoring of protective measures.

Tests 30mA, 100mA, 300mA and 500mA rated RCDs

1/2x I, I, 5x I tests standard, DC and selective RCDs

0° or 180° polarity tests on all RCDs

Selective breakers have a time delay in tripping. When selected, trip test times are extended and a 30s delay is allowed between the measurement of the fault voltage and the application of the test current

Selectable touch voltage inhibit and touch voltage display on the analogue bargraph

300Vac (25 to 45Hz) voltage measurement range

Clear 20mm high digit LCD display with analogue arc bargraph

Tough rubber armoured case with self-contained display cover that locks away underneath the instrument during use

Safety input terminal interlock - prevents unsafe connection of test leads

Safety lock-out prevents the test from operating when the circuit voltage is >300V

RCDT320 model additional features


10mA/1A RCD extended test capability

Backlit display and range selection ideal for low light environments

Ramp Test measures & displays the actual trip current of an RCD. Ideal for diagnosing nuisance tripping of RCDs

Auto testing allows remote testing from the RCD under test. The RCDT320 will automatically perform a 1//2 I, I and 5I test at both 0°and 180°. When the RCD trips the user resets it and the tester proceeds to the next test automatically. All results are displayed at the end of the test

25 to 450Hz Frequency measurement range

Optional 2-wire test leads supplied

3-phase safe - Meets the requirements of BSEN 61010-1 for safe connection to a 440V Installation Category III supply (300V phase to Earth)

Weatherproof to IP54

Dimensions (WxHxD): 190 x 75 x 140mm; Weight 980g

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

Instructions, Mains plug test leads, 8 AA alkaline batteries, neck strap.

Related links