Lenze Locking Bush ETP CLASSIC 15MM, 38mm Shaft Diameter
- RS Stock No.:
- 477-6616
- Mfr. Part No.:
- ETP CLASSIC 15MM
- Manufacturer:
- Lenze
The image is for reference only, please refer to product details and specifications
Temporarily out of stock - back order for despatch 26/07/2024, delivery within 6 working days
Price (VAT excluded) Each
TWD5,904.00
(exc. GST)
TWD6,199.20
(inc. GST)
Units | Per unit |
|---|---|
| 1 - 5 | TWD5,904.00 |
| 6 + | TWD5,768.00 |
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 477-6616
- Mfr. Part No.:
- ETP CLASSIC 15MM
- Manufacturer:
- Lenze
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- JP
Product Details
ETP Classic Locking Bushes
Unique hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for frequent operations for very accurate mounting of gears, pulleys, sprockets etc.
High concentricity and self-centering
Fast, easy locking and un-locking with few pressure screws
Automatic release when screws are loosened
Ideal for applications with smaller diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.04mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Fast, easy locking and un-locking with few pressure screws
Automatic release when screws are loosened
Ideal for applications with smaller diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.04mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Caution
To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.7, Cast Iron x 2.2, Aluminium x 2.7. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.
Specifications
Attribute | Value |
|---|---|
| Shaft Diameter | 38mm |
| Outside Diameter | 15mm |
| Locking Bush Type | Locking Bush |
| Flange Diameter | 23mm |
| Length | 35mm |
| Rated Torque | 55Nm |
| Material | Steel |
| Minimum Operating Temperature | -30°C |
| Maximum Operating Temperature | +85°C |
| Series | ETP CLASSIC |