RS PRO 6V T1 Sealed Lead Acid Battery, 10Ah

RS Stock No.:: 537-5438
Manufacturer:: RS PRO

RS PRO 6V T1 Sealed Lead Acid Battery, 10Ah

Bulk discount available

Subtotal (1 unit)**

TWD287.00

(exc. GST)

TWD301.35

(inc. GST)

256 In stock for delivery within 6 working days*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over TWD2,857.00 (ex VAT)

Units	Per unit
1 - 19	TWD287.00
20 - 99	TWD280.00
100 +	TWD263.00

**price indicative

RS Stock No.:: 537-5438
Manufacturer:: RS PRO

Lead Acid Rechargeable, RS Pro

RS Pro Lead acid batteries are suitable for use across a number of industries as well as for general purpose.

They are sealed and have many uses, and are ideal for their uninterruptable power supply and emergency back-up.

These batteries are long life rechargeable batteries.

Features and Benefits

5 years standby design

Float Standby use

Low gas emissions 99% plus recombination

Excellent recovery from deep discharge

Leak proof – Sealed batteries

ABS resin case to UL94-HB fire resistance (Horizontal Burning Test)

Road transport to UN2800 (Batteries, Wet, Non-Spillable)

Air Transport to Special Provision ’A67’ ’IATA’ & ’ICAO’. (Batteries, Wet, Non-Spillable)

Typical Applications

Automotive Industry

Aviation Industry

Golf Carts

Emergency Lighting

Medical Equipment

Wheel Chairs

Forklifts

FAQ's

What does SLA, VRLA mean?

SLA is short for Sealed Lead Acid battery. VRLA is short for Valve Regulated Lead Acid battery. Both of these batteries are the same with features such as maintenance-free and leak proof. SLA/VRLA batteries are also a type of AGM (Absorbed Glass Mat) batteries.

GEL Vs AGM Lead Acid Batteries

AGM (Absorbed Glass Mat)

These batteries contain only enough liquid to keep the specially designed glass mat wet. The glass mat is made to wick the battery electrolytes between the battery plates. If the AGM battery is broken no free liquid leaks out.

AGM batteries are preferred when a large amount of amps are required. The life expectancy remains excellent in most cases, if they are not discharged more than 60% between recharges and/or recharged fully every 3-6 months.

Gel Cell Batteries

These batteries contains silica type gel, which is a thick paste like material. It allows the electrons to flow between plates, but will not leak in a gel battery if the case is broken.

Gel Cell Batteries don't offer the same power capacity as do the same physical size as AGM batteries. Gel cell batteries excel in slow discharge rates and slightly higher operating temperatures and with excellent deep cycle capability. Recharging these batteries must be done correctly or it will suffer a premature failure.

Are Lead Acid Rechargeable Batteries Harmful?

Lead acid batteries contain chemicals that have the potential to be harmful to both your health and the environment. They contain lead which is a highly toxic metal and sulfuric acid which is a corrosive electrolyte solution.

Proper handling procedures must be followed at all times.

How to dispose of Lead Acid Batteries?

These batteries do contain hazardous chemicals so recycling is the only way to dispose of them.

Recycle responsibly. A wide range of schemes are available.

How long do they take to charge?

A full charge can take up to between 14 to 16 hours.

Warning

Do not charge in a sealed enclosure

Standards

UL94-HB

Warning

Do not charge in a sealed enclosure!

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Manufacturer	RS PRO
	Capacity	10Ah
	Nominal Voltage	6V
	Construction	AGM
	Terminal Type	T1
	Flame Resistant	No
	Dimensions	151 x 51 x 94mm
	Maximum Operating Temperature	+ 50°C
	Minimum Operating Temperature	- 20°C
	Designed for Cyclic Application	No
	Designed High Rate Application	No
	Application	Stand by Use
	Eurobat Classification	3 to 5 Years
	Chemistry	Lead Acid
	Operating Temperature Range	-20 → +50°C
	Brand Range	RS PRO
	Weight	1.6kg

	Select all
	Manufacturer RS PRO
	Capacity 10Ah
	Nominal Voltage 6V
	Construction AGM
	Terminal Type T1
	Flame Resistant No
	Dimensions 151 x 51 x 94mm
	Maximum Operating Temperature + 50°C
	Minimum Operating Temperature - 20°C
	Designed for Cyclic Application No
	Designed High Rate Application No
	Application Stand by Use
	Eurobat Classification 3 to 5 Years
	Chemistry Lead Acid
	Operating Temperature Range -20 → +50°C
	Brand Range RS PRO
	Weight 1.6kg