- RS Stock No.:
- 805-5584
- Mfr. Part No.:
- 172834 P1-25/XM
- Manufacturer:
- Eaton
6 In stock for delivery within 6 working days
Added
Price (VAT excluded) Each
TWD1,292.00
(exc. GST)
TWD1,356.60
(inc. GST)
Units | Per unit |
1 + | TWD1,292.00 |
- RS Stock No.:
- 805-5584
- Mfr. Part No.:
- 172834 P1-25/XM
- Manufacturer:
- Eaton
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
Product Details
Eaton Non-Fused Switch Disconnectors - P1 Series Isolators
The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
Performs local isolation, manual override & safety switch functions
P1 Series fit a standard front plate of 45 x 45 mm
For spare rotary thumb stick (black) see stock no. 176-9759
P1 Series fit a standard front plate of 45 x 45 mm
For spare rotary thumb stick (black) see stock no. 176-9759
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
Eaton P1-25/XM
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained.
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions are when used as a main switch, maintenance switch or manual override switch
3 pole
Auxiliary contact or neutral conductor must be fitted by the user
IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Rear mounting
Features an ambient operating temperature of -25 to +50 °C
Has a mechanical shock resistance of 15 g
M4 screw terminal
Rear mounting
Used as an emergency switching off/emergency stop device
The basic functions are when used as a main switch, maintenance switch or manual override switch
3 pole
Auxiliary contact or neutral conductor must be fitted by the user
IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Rear mounting
Features an ambient operating temperature of -25 to +50 °C
Has a mechanical shock resistance of 15 g
M4 screw terminal
Rear mounting
Note
Eaton formerly known as Moeller
Specifications
Attribute | Value |
---|---|
Number of Poles | 3P |
Maximum Current | 25A |
IP Rating | IP65 |
Power Rating | 7.5kW |
Voltage Rating | 690V |
Electrical Phase | 3 |
Accepts Padlocks | Yes |
Auxiliary Contacts Available | Yes |
Series | Eaton Moeller |
Switch Rating | 25A |
Length | 49mm |
Width | 70mm |
Depth | 75mm |
Minimum Operating Temperature | -25°C |
Throw Configuration | Single |
Maximum Operating Temperature | +50°C |
Terminal Type | Screw |