Broadcom Isolation Amplifier, 8-Pin 5.5V DIP-8
- RS Stock No.:
- 818-8262P
- Mfr. Part No.:
- ACPL-782T-000E
- Manufacturer:
- Broadcom
The image is for reference only, please refer to product details and specifications
Subtotal 1 unit (supplied in a tube)*
TWD396.00
(exc. GST)
TWD415.80
(inc. GST)
FREE delivery for orders over NT$1,300.00
In Stock
- 238 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | TWD396.00 |
*price indicative
- RS Stock No.:
- 818-8262P
- Mfr. Part No.:
- ACPL-782T-000E
- Manufacturer:
- Broadcom
Specifications
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Broadcom | |
| Product Type | Isolation Amplifier | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 4.5V | |
| Number of Channels | 1 | |
| Mount Type | Through Hole | |
| Package Type | DIP-8 | |
| Pin Count | 8 | |
| Minimum Operating Temperature | -40°C | |
| Vos - Input Offset Voltage | 0.3 mV | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Isolation Type | Reinforced | |
| Isolation Voltage | 3750Vrms | |
| Maximum Operating Temperature | 125°C | |
| Series | ACPL-782T | |
| Standards/Approvals | UL 1577, IEC 60747-5-5, CSA, DIN EN 60747-5-2(VDE 0884 Teil 2) | |
| Length | 9.8mm | |
| Height | 1.78mm | |
| Automotive Standard | AEC-Q100 | |
| Select all | ||
|---|---|---|
Brand Broadcom | ||
Product Type Isolation Amplifier | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 4.5V | ||
Number of Channels 1 | ||
Mount Type Through Hole | ||
Package Type DIP-8 | ||
Pin Count 8 | ||
Minimum Operating Temperature -40°C | ||
Vos - Input Offset Voltage 0.3 mV | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Isolation Type Reinforced | ||
Isolation Voltage 3750Vrms | ||
Maximum Operating Temperature 125°C | ||
Series ACPL-782T | ||
Standards/Approvals UL 1577, IEC 60747-5-5, CSA, DIN EN 60747-5-2(VDE 0884 Teil 2) | ||
Length 9.8mm | ||
Height 1.78mm | ||
Automotive Standard AEC-Q100 | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
Related links
- RS PRO I/O Extension Module for Use with RS PRO Logic Modules Digital
- Tedea Huntleigh Low Profile Load Cell Compression Measure
- 2961105 | Phoenix Contact PCB Mount Power Relay 6A Switching Current, SPDT
- RS PRO RS-172 Temperature & Humidity Data Logger
- Fluke 289 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- TE Connectivity Coaxial Cable RG400 Coaxial, Unterminated
- ABB D45 Pluto Series Safety Controller 6 Safety Outputs, 24 V dc
- RS PRO Black 3 mm² Hook Up Wire 30m