4D Systems microCAM-III uCAM-III Image Sensor, 1 fps UART, 5-Pin
- RS Stock No.:
- 175-7755
- Mfr. Part No.:
- uCAM-III
- Manufacturer:
- 4D Systems
Bulk discount available
Subtotal (1 unit)*
TWD1,874.00
(exc. GST)
TWD1,967.70
(inc. GST)
FREE delivery for orders over NT$1,300.00
Last RS stock
- Final 6 unit(s), ready to ship from another location
Units | Per unit |
|---|---|
| 1 - 4 | TWD1,874.00 |
| 5 + | TWD1,818.00 |
*price indicative
- RS Stock No.:
- 175-7755
- Mfr. Part No.:
- uCAM-III
- Manufacturer:
- 4D Systems
Specifications
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | 4D Systems | |
| Product Type | Image Sensor | |
| Series | microCAM-III | |
| Frame Rate | 1fps | |
| Interface Type | UART | |
| Mount Type | Through Hole | |
| Pin Count | 5 | |
| Length | 32mm | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 9V | |
| Pixel Size W x H | 5.55 x 5.55 μm | |
| Minimum Operating Temperature | -30°C | |
| Colour Sensing | RGB | |
| Maximum Operating Temperature | 85°C | |
| Height | 15.6mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand 4D Systems | ||
Product Type Image Sensor | ||
Series microCAM-III | ||
Frame Rate 1fps | ||
Interface Type UART | ||
Mount Type Through Hole | ||
Pin Count 5 | ||
Length 32mm | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 9V | ||
Pixel Size W x H 5.55 x 5.55 μm | ||
Minimum Operating Temperature -30°C | ||
Colour Sensing RGB | ||
Maximum Operating Temperature 85°C | ||
Height 15.6mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
4D Systems serial camera module
The 4D Systems uCAM-III highly integrated serial camera module attachable to any host system that requires a video camera or a JPEG compressed still camera, and is the new upgrade to the popular uCAM-II that is backwards compatible but includes some additional features. The module uses a CMOS VGA colour sensor along with a JPEG compression chip that provides a low cost and low powered camera system. The uCAM-III come in a compact form factor with a built-in lens and a 5 wire connector that provides easy access to both power and serial data. The uCAM-III ship with the 56-degree lens installed. It is used in embedded devices.
Features and Benefits
• 5VDC nominal supply
• Additions lenses available
• Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images
• Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions
• Compact in dimensions 32mmx32mmx21mm (without lens, including header)
• Locking nut for locking focus in place
• No external DRAM required
• On-board EEPROM provides a command-based interface to the external host via TTL serial link
• On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions
• Small size, low cost and low powered camera module
• UART: up to 3.68Mbps for transferring JPEG still pictures or raw images
Related links
- 4D Systems Camera Lens Lens Camera
- 4D Systems uVGA-III Graphics Controller IC 800 x 480 pixel I2C, UART 30-Pin TQFP
- Hamamatsu Photonics S10077 S10077 Image Sensor 927 fps, 12-Pin LCP
- Hamamatsu Photonics S10077 Image Sensor 927 fps, 12-Pin LCP
- onsemi AR0130CS AR0130CSSM00SPCA0-DRBR2 Image Sensor 60 fps Serial-2 Wire, 48-Pin PLCC
- onsemi AR0145CS AR0145CSSM28SMKA0-CP2 Image Sensor 120 fps MIPI, 47-Pin 47-Ball CSP
- onsemi AR0145CS AR0145CSSM28SMKA0-CP Image Sensor 120 fps MIPI, 47-Pin CSP
- ams OSRAM Mira050 Mira050-2QC1WB FT SE Image Sensor 200 fps MIPI, 46-Pin CSP