SGX Sensors Carbon Monoxide, Hydrogen Sulphide Gas Sensor IC for Automotive
- RS Stock No.:
- 254-1497
- Mfr. Part No.:
- BLD02
- Manufacturer:
- SGX Sensors
The image is for reference only, please refer to product details and specifications
Subtotal (1 bag of 20 units)*
TWD23,626.00
(exc. GST)
TWD24,807.20
(inc. GST)
FREE delivery for orders over NT$1,300.00
Temporarily out of stock
- Shipping from October 20, 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit | Per Bag* |
|---|---|---|
| 20 + | TWD1,181.30 | TWD23,626.00 |
*price indicative
- RS Stock No.:
- 254-1497
- Mfr. Part No.:
- BLD02
- Manufacturer:
- SGX Sensors
Specifications
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | SGX Sensors | |
| Product Type | Gas Sensor IC | |
| Gases Detected | Carbon Monoxide, Hydrogen Sulphide | |
| Accuracy | -10 to 10 % | |
| Response Time | 1s | |
| Application | Automotive | |
| Mount Type | PCB | |
| Minimum Supply Voltage | 9V | |
| Maximum Supply Voltage | 18V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 39mm | |
| Height | 27mm | |
| Standards/Approvals | RoHS | |
| Width | 35mm | |
| Weight | 15g | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand SGX Sensors | ||
Product Type Gas Sensor IC | ||
Gases Detected Carbon Monoxide, Hydrogen Sulphide | ||
Accuracy -10 to 10 % | ||
Response Time 1s | ||
Application Automotive | ||
Mount Type PCB | ||
Minimum Supply Voltage 9V | ||
Maximum Supply Voltage 18V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 39mm | ||
Height 27mm | ||
Standards/Approvals RoHS | ||
Width 35mm | ||
Weight 15g | ||
Automotive Standard No | ||
- COO (Country of Origin):
- PL
The SGX Sensors are a Battery Failure Detection sensors that measures H2 concentration when different battery leakage occur through CAN communication. The module has to be placed in the battery enclosure allowing to sense H2 gas generated during a failure mode. BLD2 solution allow Battery Management System (BMS) to monitor the safe operation of the battery and send an earlier signal during a thermal runaway warning to give time to passengers to leave the vehicle safely.
Automotive product
Fast response time (<1 second)
Thermal conductivity gas sensor (high reliability technology)
High H2 range detection from 0 up to 10%
CO gas sensor (able to detect the venting phase before Thermal Runaway)
Low Power consumption (50mA)
CAN 500kbps High Speed communication
Standard automotive 4 pins connector
Watertight housing IP6K7
Related links
- RS PRO Black 3 mm² Hook Up Wire 30m
- RS PRO RS-172 Temperature & Humidity Data Logger
- 2961105 | Phoenix Contact PCB Mount Power Relay 6A Switching Current, SPDT
- Tedea Huntleigh Low Profile Load Cell Compression Measure
- ABB D45 Pluto Series Safety Controller 6 Safety Outputs, 24 V dc
- TE Connectivity Coaxial Cable RG400 Coaxial, Unterminated
- RS PRO I/O Extension Module for Use with RS PRO Logic Modules Digital
- Fluke 289 Handheld Digital Multimeter 10A ac Max 1000V ac Max