Interroll M12, M8 Conveyor Roller, 50mm x 450mm
- RS Stock No.:
- 740-5017
- Mfr. Part No.:
- 84VLJAE6FT 450RL +89RA
- Manufacturer:
- Interroll
The image is for reference only, please refer to product details and specifications
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 740-5017
- Mfr. Part No.:
- 84VLJAE6FT 450RL +89RA
- Manufacturer:
- Interroll
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
Interroll Motorised Drive Roller With Control Card
The Interroll EC310 series motorised driver roller with control card has a length of 450mm and a diameter of 50mm. This driven roller has a gear ratio of 24:1 and spindle thread size is M8, M12. It has an improved, lightweight design that incorporates an all-new housing and connector as well. It is suitable for a wide range of applications.
Note:
Noise level value can vary according to installation conditions, profile shapes and the resonance behaviour of the system.
Supplied with:
DC20 Drive Control
Note:
Noise level value can vary according to installation conditions, profile shapes and the resonance behaviour of the system.
Supplied with:
DC20 Drive Control
Features and Benefits
Brushless motor with an integrated electronic controller
Excellent acceleration and braking performance
4 quadrant motor control giving constant speed/torque
Low noise level is 55dB(A)*
9 gear ratios, wide speed range and high torque for optimum adjustment
Additional speed adjustment via analogue set point
450mm cable with M8 snap-in plug (cable may be extended up to 10m)
New design uses up to 30% less energy
Recycles brake energy
2-groove lightweight design
Excellent acceleration and braking performance
4 quadrant motor control giving constant speed/torque
Low noise level is 55dB(A)*
9 gear ratios, wide speed range and high torque for optimum adjustment
Additional speed adjustment via analogue set point
450mm cable with M8 snap-in plug (cable may be extended up to 10m)
New design uses up to 30% less energy
Recycles brake energy
2-groove lightweight design
Specifications
Attribute | Value |
|---|---|
| Roller Diameter | 50mm |
| Roller Length | 450mm |
| Component Type | Roller Drive |
| Load Capacity | 50kg |
| Ratio | 24:1 |
| Spindle Thread Size | M12, M8 |
| Maximum Conveying Speed | 0.65m/s |
| Maximim Motor Voltage | 24V dc |