Fluke i30s Current Probe & Clamp

  • RS Stock No. 645-1836
  • Mfr. Part No. I30S
  • Manufacturer Fluke
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

i30s 30A High Resolution, High Bandwidth Oscilloscope Current Probe

The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.

Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
2.0m flying lead terminated with 50Ω BNC plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A

Supplied with

Alkaline PP3 battery, 4mm shrouded plug adaptor and operators manual.

Fluke AC/DC Current Clamp

The Fluke i30s AC/DC current clamp has a current range of 30A. It is a new age device used with oscilloscopes and DMMs for accurate, non-intrusive measurement and complex waveform currents.
Inclusions:
Alkaline PP3 battery, 4mm shrouded plug adaptor, and an operator’s manual
Warning
Use of the probe on uninsulated conductors is limited to 300VAC RMS or DC and frequencies below 1kHz.

Features and Benefits

• Power LED warns of low battery by flashing
• Zero adjust knob to accommodate offsets
• The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
• 2.0m flying lead terminated with 50ohm BNC plugs
• Withstands overloads to 500A
• Operating temperature ranges between 0°C and 50°C

Applications

• Inverters
• Switch mode power supplies industrial controllers
• Automotive leakage currents
• Applications requiring accurate isolated current measurement
• Waveform analysis

Certifications

• CAT III 300V
• IEC 61010-1
• Pollution degree 2
• IEC 61010-2-032
• IEC 61326-1
• CE certified
• cCSAus certified
• EN61010-1
• EN61010-2-032

Warning

  • Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.
Specifications
Attribute Value
Current 30A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 100kHz
Maximum Conductor Size 19mm
Safety Category CAT III 300 V
Safety Category Level CAT III
Model Number p I30S
Best Accuracy ±1% + 2 mA
Safety Category Voltage 300V
Bandwidth DC → 100 kHz
1 Within 3 working day(s) (local stock)
14 Within 6 working day(s) (Global stock)
Price (VAT excluded) Each
TWD 27,781.00
(exc. GST)
TWD 29,170.00
(inc. GST)
units
Per unit
1 +
TWD27,781.00