Knipex, 97 Crimping Die Set, Open Plug Type

RS Stock No.:: 374-4006
Mfr. Part No.:: 97 49 15
Manufacturer:: Knipex

Knipex, 97 Crimping Die Set, Open Plug Type

Bulk discount available

Price Each**

TWD12,379.00

(exc. GST)

TWD12,997.95

(inc. GST)

2 In stock for delivery within 6 working days*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over TWD2,857.00 (ex VAT)

Units	Per unit
1 - 4	TWD12,379.00
5 +	TWD11,141.00

**price indicative

RS Stock No.:: 374-4006
Mfr. Part No.:: 97 49 15
Manufacturer:: Knipex

Datasheet - 97 49 15

Crimp Die Set 97 49 15

Crimp die set for system tool KNIPEX 97 43 200 (stock no. 336-8084)
For crimping uninsulated, open connectors, 6.3 mm wide
The front profile is for flag terminals (angled blade terminals) 1.25 → 2.5 mm²
The centre profile is for straight plugs, 3 → 4 mm²
The back profile is for straight plugs, 4 → 6 mm²

Crimp die set 97 49 15

Knipex universal crimping die 97 43 200 / RS 336-8084

For flag plugs (6.3mm wide) and non-insulated open shank connectors (4.8mm wide) of 1 - 2.5 / 1 - 6mm² - AWG 17 - 13 / 17 - 10.
Dies are machined and engraved with the cable section
The dies are fixed with a screw.

Can be used with the Knipex 97 43 200 / RS 336-8084 universal crimping tool, which offers the following advantages :

Can be used with the Knipex 97 43 200 / RS 336-8084 universal crimping tool, which offers the following advantages
Interchangeable crimping dies
One tool for almost 1,000 different crimps
Virtually parallel crimping mechanism
Consistently high crimping quality thanks to precision dies and forced locking mechanism (can be unlocked)
Crimping pressure is precisely set at the factory (calibrated), adjustable
Increased force due to lever transmission for less tiring work

Features and benefits :

Parallel crimping
Precision machining to obtain a precise crimp that meets the manufacturer's technical specifications
Over 1000 interchangeable dies.

Weight: about 40g
Special quality oil-hardened vanadium chrome electric steel

Maintenance tips :

Product maintenance

To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.

Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

The setting of the crimping die ranges should also be checked.

Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil.

Importance of high quality crimping
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the crimping of the insulation, which relieves vibration and stress. It is important that the electrical connection is gas-tight with no voids between the wire strands and the lug. If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete gas tight crimp, preventing future deterioration of the electrical connection and insulation failure

Attribute	Value
Crimp Connector Type	Open Plug Type
Minimum Wire Size mm²	1mm²
Maximum Wire Size mm²	6mm²
Maximum Wire Size AWG	10AWG
Terminal Insulation	Uninsulated
Number of Ports	3
For Use With	Universal crimping plier - 97 43 200
Series	97