Lapp ÖLFLEX CLASSIC 100 SY Control Cable, 3 Cores, 1 mm², SY, Screened, 50m, Grey PVC Sheath, 17 AWG

From Lapp, the Olflex Classic 110 series is a PVC control cable ideal for a variety of applications. Protected by braided steel wire, the cable has a high degree of mechanical resistance. Coupled with its resistance to chemicals and oils, Olflex Classic 110 cables are fit for use in the roughest of operating conditions.

The flexible multi-core cable is comprised of fine-wire copper strands twisted in layers, covered in PVC insulation. Then cable then has an oxidated protective steel wire braiding, and a transparent flame retardant out sheath. The transparent sheath is useful to inspect the cable for wear and tear, such as corrosion and deterioration.

Features and Benefits

• Fine copper wire strands in accordance to VDE 0295 class 5 / IEC class 5
• Flame retardant to IEC 60332-1-2
• High resistance against acids, alkaline and oils
• Good Chemical Resistance
• Excellent mechanical protection
• Compliant with directive 73//23 (Low Voltage Directive)
• Operating temperature range for fixed installations -40°C to +80°C
• Operating temperature range for occasional flexing -5°C to +70°C

Applications

Lapp Olflex Classic 110 SY cable is very durable, and so can be used for a wide range of applications in areas where high mechanical stress is likely. It is often used in;

• HVAC Systems
• Industrial Machinery
• Machine Tooling
• Plant Engineering

Accessories

Lapp cables should be used with accessories that match their capabilities, and as such Lapp provides a range of durable and easy-to-install cable glands.

• 433-0945 is an M16 IP68 Skintop Cable Gland
• 433-0951 is an M20 IP68 Skintop Cable Gland
• 433-0967 is an M25 IP68 Skintop Cable Gland
• 433-0973 is an M32 IP68 Skintop Cable Gland
• 433-0989 is an M40 IP68 Skintop Cable Gland

Connection and control cable with coloured cores and steel wire braid for control devices, machine tools, conveyor belts and production lines in dry, damp and wet interiors
Fine wire strands of copper
Twisted cores in layers, colour coded in accordance with VDE 0293
Inner sheathing made from special PVC compound, grey
Braid made from oxidation-protected steel wire braid
Transparent outer sheathing made from special PVC-based mixture, flame-retardant to IEC 332.1
Compliant with Directive 73/23/EWG (Low Voltage Directive)

This cable confirms to ECD 73/23/EEC (low voltage directive).

Securely link up your control and instrumentation equipment using this control cable from LAPP. A three-core design means this conductor transmits three signals simultaneously, so it reduces clutter in a multi-circuit setup. Its PVC sheath stands up to wear and abrasion for use in harsh environments. It comes in a 50m reel, so you can cut it down to size as needed for use in multiple applications.

• Compact outer diameter of 8.8mm to fit into tight spots
• Copper wires are highly conductive for reliable signal transmission

• HVAC systems
• Audio and video equipment
• Elevators and escalators

This component has a minimum bend radius of 20 times its diameter, making it a flexible choice for installation around corners or in awkward areas.

VDE 0295, Part 5