Mitutoyo 150mm, 6in Digital Caliper Caliper 0.01 mm Resolution, Imperial, Metric

RS Stock No.:: 432-025
Mfr. Part No.:: 500-171-30
Manufacturer:: Mitutoyo

Mitutoyo 150mm, 6in Digital Caliper Caliper 0.01 mm Resolution, Imperial, Metric

Price Each**

Was TWD11,275.00

You pay

TWD10,605.00

(exc. GST)

TWD11,135.25

(inc. GST)

3 In CN stock for delivery within 2 working day(s) (local stock)*

13 In Global stock for delivery within 6 working day(s)

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over TWD2,857.00 (ex VAT)

Units	Per unit
1 +	TWD10,605.00

**price indicative

RS Stock No.:: 432-025
Mfr. Part No.:: 500-171-30
Manufacturer:: Mitutoyo

Mitutoyo-Absolute

Electronic calipers with an LCD display which will display in either ’metric/imperial (switchable)’ or ’metric only’ reading depending on model.

General Features:

Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish

All measuring surfaces are ground and lapped for high accuracy
Capable of measuring: inside, outside, depth and step
Storage Temp: -10°C to +60°C
Operating Temp: 0°C to +40°C

Electronic Features:

ON/OFF - Switches unit on, display indicates distance of jaws from pre-set origin point
ABS - Absolute feature re-sets the ’reference’ point of measurement of the instrument jaws
in./mm - Selects imperial or metric display
Origin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off

Note

Imperial/metric versions have thumbwheel where metric does not.
SPC output versions - A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section

Supplied with

SR44 Battery

Mitutoyo Digital Precision Caliper

The Mitutoyo 0 to 6in digital precision calliper is a highly accurate measuring instrument. It is enabled with a new age electromagnetic inductive sensor that repels dirt, oil, and water ensuring maximum accuracy. It has a function that starts the absolute-mode measurement without any zero-setting after it is switched on. The INC (incremental) measurement function enables the display value to be set to zero, temporarily, at the current slider position to enable easy incremental-mode measurement. The original position of the calliper can be set, or reset, with the ’origin' switch at any time. It has advanced functions like low battery alarm indication and carbide-tipped jaw that makes it ideal for various applications like measurement of rough-machined workpieces, castings, and grindstones.
Note:
Imperial/metric versions have thumbwheel where metric does not.
SPC output versions -A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section
Supplied with SR44 Battery

Features and Benefits

Step-measurement capable
Battery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo's absolute scale
The slider configuration features an ergonomic, thumb-friendly shape
Range of 0in to 6in
Resolution of 0.01mm
Accuracy of ±0.001in
Button-type silver oxide battery power supply
High response speed
Carbide-tipped jaws for outside and inside measurement
Capable of measuring: inside, outside, depth and step
All measuring surfaces are ground and lapped for high accuracy

Applications

Mechanical engineering
Aerospace industries
Steel and other metalwork industry