- RS Stock No.:
- 209-3627
- Mfr. Part No.:
- AOH 3048
- Manufacturer:
- SKF
Temporarily out of stock - back order for despatch 06/06/2024, delivery within 6 working days
Added
Price (VAT excluded) Each
TWD60,727.00
(exc. GST)
TWD63,763.35
(inc. GST)
Units | Per unit |
1 + | TWD60,727.00 |
- RS Stock No.:
- 209-3627
- Mfr. Part No.:
- AOH 3048
- Manufacturer:
- SKF
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- LT
Product Details
SKF Bearing Withdrawal Sleeves - AOH 304
Use this hydraulic withdrawal sleeve from SKF to mount and dismount a bearing from the cylindrical seat of a stepped shaft. Simply push it into the bore of the bearing to reduce the clearance from the shaft and achieve a tight fit. The sleeve features a duct with G 1/4 thread for oil injection, which virtually eliminates friction and makes dismounting easy. It has a bore diameter of 220 mm, with a small taper to an outside diameter of 240 mm for easy fitting to standard equipment.
Coated with a solvent-free rust inhibitor to prolong the life of the product
Oil injection method makes lubrication easy
Bearing can be mounted at any point on the shaft
Oil injection method makes lubrication easy
Bearing can be mounted at any point on the shaft
Application information
Automotive workshops
Rotating industrial machinery
Wind turbine industry
Rotating industrial machinery
Wind turbine industry
How do I mount a tapered bearing using a withdrawal sleeve?
Coat both mating surfaces with a thin layer of light oil then push the bearing onto the sleeve. Install the appropriate accessories, fittings and pipes and inject oil until the mating surfaces are separated by a thin film. Open the oil release valve to the pump used for injection and allow the oil to drain for at least 20 minutes.
Specifications
Attribute | Value |
---|---|
Type | Bearing Withdrawal Sleeves |
Inner Diameter | 220mm |
Dimensions | 260 x 240 x 116mm |
For Use With | HM 3052, HMV 52 E |