Recently searched

    Fuse Holders & Accessories

    We offer a superb range of fuse holders and accessories for domestic and commercial use from a range of brands including Schurter, Littelfuse, Cooper Bussmann and Mersen.

    What is a fuse holder?

    A fuse holder is a casing or housing into which fuses are inserted, simply to hold the fuse in place in order to fulfill its function. They come in many shapes, colours and sizes depending on where they need to be installed.

    What types of fuse holder are available?

    You will find the following types on the site:

    • Base mount: enables the base of the holder to be attached to something with holes for screws
    • Bottle fuse: a holder for cylindrical bottle fuses, usually with a cap to complete the circuit
    • Inline: a housing for a fuse in a wire or cable, usually for safety purposes
    • Panel mount: another housing with a screw cap that can be mounted into a panel for easy access to the fuse
    • Rail mount: a holder that contains fuses that are slotted into sets with metal contacts

    We also stock fuse blocks, clips, switches and covers as well as PCB mounts and other types of accessories.

    Why do fuse holders melt?

    A fuse holder making poor contact with a fuse can be the cause of this, that is if the fuse has not blown. Current flowing through the electrical circuit, below the fuse's rating, will cause heat from the resistance. This can generate enough heat to cause the fuse holder to melt. It may not be immediate and can happen suddenly after installation.

    How do I clean a fuse holder?

    • Ideally wear gloves, either rubber or plastic
    • Ensure the mains power is off and there are no live wires
    • Use a dry cloth or toothbrush to clean the connector springs
    • A small piece of emery cloth wrapped around a screwdriver can be used to scrub the inside of the fuse holder itself
    • Use a small paintbrush to apply lubricant to all areas of the fuse holder once cleaned
    Fuse Blocks
    Fuse Blocks
    Fuse Clips
    Fuse Clips
    Fuse Covers
    Fuse Covers
    Fuse Holder Accessories
    Fuse Holder Accessories
    Fuse Holders
    Fuse Holders
    Fuse Pullers & Testers
    Fuse Pullers & Testers
    Neutral Links
    Neutral Links
    Solid Links
    Solid Links

    1612 Products showing for Fuse Holders & Accessories

    1 of 81
    Littelfuse 30A PCB Mount Fuse Holder, 80V
    • RS Stock No. 410-7672
    • Mfr. Part No. 178.6165.0002
    Each
    TWD133.00
    Littelfuse 20A Panel Mount Fuse Holder for 6.3 x 32mm Fuse, 1P, 250V ac
    • RS Stock No. 787-4423P
    • Mfr. Part No. 03453LS1H
    Each (Supplied in a Bag)
    TWD155.00
    Eaton Fuse Puller, Sizes 1 → 1-3/4
    • RS Stock No. 849-5973
    • Mfr. Part No. FP-3
    Each
    TWD2,718.00
    Littelfuse 210A Base Mount Fuse Holder for ATO Fuse
    • RS Stock No. 894-9622
    • Mfr. Part No. PDM61001ZXM
    Each
    TWD712.00
    Littelfuse Blade Fuse Puller
    • RS Stock No. 216-7919
    • Mfr. Part No. 00970019X
    Each
    TWD476.00
    Schurter 10A Panel Mount Fuse Holder for 5 x 20mm Fuse, 1P
    • RS Stock No. 789-7854
    • Mfr. Part No. 4301.1407
    Each
    TWD94.00
    Bulgin 10A Inline Fuse Holder for 6.3 x 25mm Fuse, 250V ac
    • RS Stock No. 408-404
    • Mfr. Part No. FX0280
    Each (In a Pack of 5)
    TWD148.60
    Wurth Elektronik 10A Panel Mount Fuse Holder for 5 x 20mm Fuse, 1P, 250V ac
    • RS Stock No. 893-0609
    • Mfr. Part No. 696212001002
    Each (In a Pack of 5)
    TWD47.20
    Littelfuse 16A Panel Mount Fuse Holder for 6.3 x 32, 5 x 20mm Fuse, 250V ac
    • RS Stock No. 769-0164
    • Mfr. Part No. 80000000005
    Each (In a Pack of 5)
    TWD76.60
    Littelfuse PCB Mount Fuse Holder for ATO Fuse, 80V dc
    • RS Stock No. 894-9600
    • Mfr. Part No. 178.6164.0002
    Each
    TWD101.00
    Mersen 32A Rail Mount Fuse Holder for 10 x 38mm Fuse, 1P, 690 V ac → 1kV ac/dc
    • RS Stock No. 189-5338
    • Mfr. Part No. G1062721 / CUS101
    Each
    TWD292.00
    Littelfuse Phosphor Bronze PCB Mount Fuse Clip for 5 x 20mm Cartridge Fuse
    • RS Stock No. 769-0168
    • Mfr. Part No. 52000001009
    Each (In a Pack of 50)
    TWD4.40
    Socomec 32A Neutral Link for Cylindrical Fuses, 10mm x 38mm
    • RS Stock No. 122-5270
    • Mfr. Part No. 60190000
    Each (In a Pack of 10)
    TWD41.40
    Siemens 100A Rail Mount Fuse Holder for 22 x 58mm Fuse, 3P, 690V
    • RS Stock No. 225-5427
    • Mfr. Part No. 3NW7231
    Each
    TWD4,196.00
    Eaton 20A Rail Mount Fuse Holder, 1P, 690V ac
    • RS Stock No. 182-1764
    • Mfr. Part No. RS20P-GGN
    Each
    TWD5,491.00
    Schurter 6.3A Inline Fuse Holder for 5 x 20mm Fuse, 32V dc
    • RS Stock No. 173-7933
    • Mfr. Part No. 8601.2001.08
    Each (In a Box of 50)
    TWD43.60
    Eaton 15A Inline Fuse Holder for 6.3 x 32mm Fuse, 32V dc
    • RS Stock No. 849-5778
    • Mfr. Part No. HRK-R
    Each
    TWD439.00
    Schurter 16A PCB Mount Fuse Holder for 5 x 20 mm, 6.3 x 32 mm Fuse, 600V ac
    • RS Stock No. 167-6951
    • Mfr. Part No. 0751.0056
    1 Bag of 20
    TWD107.00
    Littelfuse Spring Brass PCB Mount Fuse Clip for 6.3 x 32mm Cartridge Fuse
    • RS Stock No. 787-4249
    • Mfr. Part No. 01020071Z
    Each (In a Pack of 10)
    TWD6.10
    Better World
    Schneider Electric 125A Rail Mount Fuse Holder for 22 x 58mm Fuse, 3P+N, 690V ac
    • RS Stock No. 482-465
    • Mfr. Part No. DF223NC
    Each
    TWD2,396.00
    Results per page
    1
    2
    3
    81

    Related links