PCB Headers

PCB (Printed circuit board) headers are a type of electrical connector that allows you to join connections to a PCB using a single block. Typically headers have one side that is designed to be surface mounted and soldered onto the board with the other side allowing connections. Pins on the header can also be surrounded by a shroud to make the unit more secure, prevent pins from bending and allow locking.



Why use PCB headers?


PCB headers enable the user to make multiple electrical connections to a PCB using one connection block or cable. They're also easy to use. Simply solder a PCB header onto your board and you'll be ready to make connections to multiple pins. Typically each pin can be used for varying things such as data or power.


PCB headers also make a great introduction to learner electronics since they're simple to understand and have one primary function of allowing wire-to-board. Incorporating them into learning boards, kits and other accessories is popular with the likes of Arduino, Raspberry Pi and other single board computers.



Types of PCB headers:


PCB headers are made in both shrouded (where the connections are housed in a plastic case) and non-shrouded pin header types. Shrouded connectors are more robust and less likely to cause short circuits, but do take up more space on the PCB. Pin headers, by contrast, are easier to work with and suit a wider range of applications.



  • Single or double-row pin headers: The most commonly used types of PCB headers are single- or double-row pin headers. These are produced in matching male and female versions and are made from folded sheet metal with a square cross-section.

  • Machine-pin headers: Machine-pin headers have a circular cross-section, which fits more precisely into round PCB holes, providing a better electrical connection, greater durability and an increased lifespan.

  • Angled connectors: Headers can come in a variety of different angles. Some of the most common angles are straight, 90° and 180°. Angled headers can be useful if you need to reduce strain on a cable or need more room on your board verticall/horizontally.


...
Read more Read less

Filters

Viewing 1 - 20 of 3017 products
Results per page
Description Price Series Pitch Number of Contacts Number of Rows Body Orientation Mating Pin Length Shrouded/Unshrouded Connector System Mounting Type Tail Pin Length CAD Drawing Termination Method Contact Material Contact Plating
RS Stock No. 797-6604
Mfr. Part No.09-65-2029
BrandMolex
TWD24.80
Each (In a Pack of 10)
units
KK 396 3.96mm 2 1 Straight - Unshrouded Wire to Board Through Hole - - Solder Brass Tin
RS Stock No. 170-7023
Mfr. Part No.55935-0210
BrandMolex
TWD8.30
Each (In a Tray of 500)
units
MicroClasp 2.0mm 2 1 Right Angle - Shrouded Wire to Board Through Hole - - Solder - Tin
RS Stock No. 188-018
Mfr. Part No.55935-0210
BrandMolex
TWD11.70
Each (In a Pack of 10)
units
MicroClasp 2.0mm 2 1 Right Angle - Shrouded Wire to Board Through Hole - - Solder - Tin
RS Stock No. 161-9416
Mfr. Part No.55935-0710
BrandMolex
TWD14.50
Each (In a Tray of 2400)
units
MicroClasp 2.0mm 7 1 Right Angle - Shrouded Wire to Board Through Hole - - Solder - Tin
RS Stock No. 188-080
Mfr. Part No.55935-0710
BrandMolex
TWD20.90
Each (In a Pack of 10)
units
MicroClasp 2.0mm 7 1 Right Angle - Shrouded Wire to Board Through Hole - - Solder - Tin
RS Stock No. 679-5684
Mfr. Part No.26-60-4030
BrandMolex
TWD6.90
Each (In a Pack of 10)
units
KK 396 3.96mm 3 1 Straight - Unshrouded Wire to Board Through Hole - - Solder Brass Tin
RS Stock No. 679-4940
Mfr. Part No.03-09-1091
BrandMolex
TWD17.30
Each (In a Pack of 10)
units
STANDARD .093" 5.03mm 9 3 Straight - - - Panel Mount - - - - -
RS Stock No. 188-052
Mfr. Part No.55935-0410
BrandMolex
TWD10.20
Each (In a Pack of 10)
units
MicroClasp 2.0mm 4 1 Right Angle - Shrouded Wire to Board Through Hole - - Solder - Tin
RS Stock No. 236-3195
Mfr. Part No.39-03-6040
BrandMolex
TWD12.00
Each (In a Pack of 5)
units
STANDARD .093" 6.7mm 4 1 Straight - - - - - - - - -
RS Stock No. 670-5357
Mfr. Part No.90136-2103
BrandMolex
TWD46.20
Each (In a Pack of 5)
units
C-Grid III 2.54mm 3 1 Right Angle - Shrouded Wire to Board Through Hole - - Solder Brass Tin
RS Stock No. 670-0355
Mfr. Part No.43045-0425
BrandMolex
TWD50.80
Each (In a Pack of 5)
units
Micro-Fit 3.0 3.0mm 4 2 Straight - Shrouded Wire to Board Through Hole - - Solder Brass Gold
RS Stock No. 542-7191
Mfr. Part No.53261-1571
BrandMolex
TWD42.40
Each (In a Pack of 5)
units
PicoBlade 1.25mm 15 1 Right Angle - Shrouded Wire to Board Surface Mount - - Solder Phosphor Bronze Tin
RS Stock No. 161-9427
Mfr. Part No.90136-2103
BrandMolex
TWD32.40
Each (In a Tray of 232)
units
C-Grid III 2.54mm 3 1 Right Angle - Shrouded Wire to Board Through Hole - - Solder Brass Gold
RS Stock No. 188-024
Mfr. Part No.55935-0310
BrandMolex
TWD10.90
Each (In a Pack of 10)
units
MicroClasp 2.0mm 3 1 Right Angle - Shrouded Wire to Board Through Hole - - Solder - Tin
RS Stock No. 602-1132
Mfr. Part No.53258-0229
BrandMolex
TWD18.30
Each (In a Pack of 10)
units
53258 3.5mm 2 1 Straight - Shrouded - Through Hole - - Solder Brass -
RS Stock No. 797-8900
Mfr. Part No.53258-0229
BrandMolex
TWD17.80
Each (In a Pack of 10)
units
- 3.5mm 2 1 Straight - Shrouded Wire to Board Through Hole - - Solder Brass -
RS Stock No. 670-4698
Mfr. Part No.43650-0200
BrandMolex
TWD30.80
Each (In a Pack of 5)
units
Micro-Fit 3.0 3.0mm 2 1 Right Angle - Shrouded Wire to Board Through Hole - - Solder Brass Tin
RS Stock No. 484-1883
Mfr. Part No.39-28-1023
BrandMolex
TWD18.40
Each (In a Pack of 5)
units
Mini-Fit Jr 4.2mm 2 2 Straight - Shrouded Wire to Board Through Hole - - Solder Brass Tin
RS Stock No. 170-7064
Mfr. Part No.90131-0764
BrandMolex
TWD47.80
Each (In a Tray of 800)
units
C-Grid III 2.54mm 8 2 Straight - Unshrouded Wire to Board Through Hole - - Solder Brass Gold
RS Stock No. 167-1840
Mfr. Part No.87832-0820
BrandMolex
TWD34.60
Each (In a Tube of 50)
units
Milli-Grid 2.0mm 8 2 Straight - Shrouded Wire to Board Surface Mount - - Solder Phosphor Bronze Gold