Microchip ATMEGA32U2-AU, 8 bit AVR, ATMEGA32U2 Microcontroller, 16 MHz, 32kB FLASH, 32-Pin TQFP

Bulk discount available

Subtotal (1 pack of 2 units)*

TWD278.00

(exc. GST)

TWD291.90

(inc. GST)

Add to Basket
Select or type quantity
In Stock
  • 20 unit(s) ready to ship from another location
  • Plus 334 unit(s) shipping from December 17, 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
Per Pack*
2 - 8TWD139.00TWD278.00
10 +TWD135.00TWD270.00

*price indicative

Packaging Options:
RS Stock No.:
131-0287
Mfr. Part No.:
ATMEGA32U2-AU
Manufacturer:
Microchip
Find similar products by selecting one or more attributes.
Select all

Brand

Microchip

Series

ATMEGA32U2

Product Type

Microcontroller

Package Type

TQFP

Mount Type

Surface

Pin Count

32

Device Core

AVR

Data Bus Width

8bit

Program Memory Size

32kB

Interface Type

SPI, USART

Maximum Clock Frequency

16MHz

RAM Size

1kB

Maximum Supply Voltage

5.5V

Analogue Comparators

1

Minimum Operating Temperature

-40°C

Number of Programmable I/Os

22

Maximum Operating Temperature

85°C

Length

7mm

Width

7 mm

Standards/Approvals

No

Height

1.05mm

Minimum Supply Voltage

2.7V

Distrelec Product Id

304-37-096

Number of Timers

2

Program Memory Type

FLASH

ADCs

0 bit

Automotive Standard

No

Instruction Set Architecture

RISC

The Microchip ATmega32U2 CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It operates on 2.7V to 5.5V voltage range. The AVR core combines a rich instruction set with 32 general purpose working registers. It features 32Kbytes of In-System Programmable Flash with Read-While-Write capabilities, 1024 bytes EEPROM, 1024 bytes SRAM 22 general purpose I/O lines, 32 general purpose working registers, two flexible Timer/Counters with compare modes and PWM, one USART, a programmable Watchdog Timer with Internal Oscillator, an SPI serial port, debugWIRE interface, also used for accessing the On-chip Debug system and programming and five software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next interrupt or hardware reset.

Up to 16 MIPS Throughput at 16 MHz

In-System Programming by on-chip Boot Program hardware-activated after reset

Programming lock for software security

USB 2.0 Full-speed device module with interrupt on transfer completion

Microcontroller reset on USB Bus Reset without detach

USB Bus Disconnection on Microcontroller Request

One 8-bit Timer/Counters with Separate Prescaler and Compare Mode (two 8-bit PWM channels)

One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Mode (three 8-bit PWM channels)

Master/Slave SPI Serial Interface

Programmable watchdog timer with separate on-chip oscillator

On-chip analog comparator

Interrupt and wake-up on pin change

Power-On Reset and programmable brown-out detection

Internal calibrated oscillator

External and internal Interrupt sources

QFN32 (5x5mm) / TQFP32 package

Related links