Linear Motion

We offer a great range of linear slides, linear guides & positioning tables for any power transmission requirement. We work closely with industry-leading brands like igus, Bosch Rexroth, THK, IKO Nippon Thmpson and NSK so you have an expert selection of cylinder guides, slide assemblies, guide wheels and slewing rings. You can also choose from a full range of accessories including socket tools, T-Nuts and combination plates.

What is power transmission?

Power transmission, or specifically mechanical power transmission in this case, are the components used in an industrial system with moving parts, as opposed to those that are powered by electricity.

What types of mechanical power transmission options are available?

The following types are available:

  • Cylinder Guides: pneumatic devices for generating motion in various ways
  • Linear Guides
  • Assemblies: a load bearing mechanism that also guides the load in a straight line
  • Guide blocks: the carriage that slides along the assembly
  • Rails: the beam along which carriage slides along
  • Linear Slides
  • Assemblies: for precise linear rolling motion along guideways
  • Cap wipers: these lubricate contact surfaces, remove debris and improve operational safety
  • Carriage plates: a flush surface for mounting your components and for attaching t-nuts with grooves for drifting
  • Flange clamps: these enable slides to become self-supporting beams
  • Guide wheels: ball bearing based wheels allowing precision linear motion
  • Slewing rings: these are slow turning rotating rings containing bearings
  • Rails: allow for powered or manual mechanism motion in a linear direction
  • T-Nuts: these secure fixings for your components
  • Track Rollers: these are concentric and eccentric adjusting roller wheels for a spacer slide
  • Adapter Bushings: are used for mounting guide wheels, in concentric and eccentric varieties
  • Positioning Cables
  • Clamping strips: used for attaching existing and additional equipment
  • Combination plates: are securing attachments which can be drilled
  • Angles: for 45° and 90° angular component clamping
Flat Cage Assemblies
Flat Cage Assemblies
Guide Wheels
Guide Wheels
Linear Bearing Units
Linear Bearing Units
Linear Bearings
Linear Bearings
Linear Guide Blocks
Linear Guide Blocks
Linear Guide Rails
Linear Guide Rails
Linear Guides
Linear Guides
Linear Shaft Supports
Linear Shaft Supports
Linear Shafts
Linear Shafts
Linear Slide Accessories
Linear Slide Accessories
Linear Slide Rails
Linear Slide Rails
Linear Slides
Linear Slides
Positioning Tables
Positioning Tables
Slewing Rings
Slewing Rings

2057 Products showing for Linear Motion

1 of 103
In Stock
INA KB12 Bearing with 12 mm ID 22 mm OD 640 N 570 N
  • RS Stock No. 172-1207
  • Mfr. Part No. KB12
Subtotal (1 unit)
TWD1,168.00(exc. GST)
In Stock
THK SHS15-160L(GK) Series, SHS15-160L(GK), Linear Guide Rail 15 mm width 160 mm Length
  • RS Stock No. 211-5250
  • Mfr. Part No. SHS15-160L(GK)
Subtotal (1 unit)
TWD1,859.00(exc. GST)
In Stock
Bosch Rexroth R060230810 Bearing with 16 mm OD
  • RS Stock No. 489-3985
  • Mfr. Part No. R060230810
Subtotal (1 unit)
TWD1,055.00(exc. GST)
In Stock
THK Linear Guide Carriage SHS15V1SS(GK) SHS Series, 14200 kN Dynamic Load
  • RS Stock No. 730-0023
  • Mfr. Part No. SHS15V1SS(GK)
Subtotal (1 unit)
TWD3,254.00(exc. GST)
Temporarily out of stock
THK Linear Guide Carriage SRS12MUUC1(GK) SRS Series, 4 kN Dynamic Load
  • RS Stock No. 217-5240
  • Mfr. Part No. SRS12MUUC1(GK)
Subtotal (1 unit)
TWD2,434.00(exc. GST)
In Stock
Igus T Series, TS-04-12-600, Linear Guide Rail 12 mm width 600 mm Length
  • RS Stock No. 488-5057
  • Mfr. Part No. TS-04-12-600
Subtotal (1 unit)
TWD1,692.00(exc. GST)
In Stock
IKO Nippon Thompson Linear Guide Carriage MLC5C1HS2 MLC Series, 582 N Dynamic Load
  • RS Stock No. 917-5954
  • Mfr. Part No. MLC5C1HS2
Subtotal (1 unit)
TWD1,920.00(exc. GST)
In Stock
Igus Linear Guide Carriage WW-10-40-10 DryLin W Series
  • RS Stock No. 488-5136
  • Mfr. Part No. WW-10-40-10
Subtotal (1 unit)
TWD2,795.00(exc. GST)
In Stock
INA KB16 Bearing with 16 mm ID 26 mm OD 840 N 780 N
  • RS Stock No. 172-1210
  • Mfr. Part No. KB16
Subtotal (1 unit)
TWD1,467.00(exc. GST)
In Stock
Bosch Rexroth R063202000 Bearing with 32 mm OD
  • RS Stock No. 161-2572
  • Mfr. Part No. R063202000
Subtotal (1 unit)
TWD1,663.00(exc. GST)
In Stock
INA Linear Guide Carriage KWVE35-B-V1-G3 KWVE35 Series, 38000 N Dynamic Load
  • RS Stock No. 172-1066
  • Mfr. Part No. KWVE35-B-V1-G3
Subtotal (1 unit)
TWD7,110.00(exc. GST)
In Stock
Accuride, DZ0115-0070RS Mild Steel Linear Slides, 632 mm Stroke Length
  • RS Stock No. 699-8515
  • Mfr. Part No. DZ0115-0070RS
Subtotal (1 unit)
TWD889.00(exc. GST)
In Stock
Ewellix Makers in Motion Linear Shaft Support Bearing Housing 35.5 mm, LSCS 16 56 mm 15 mm
  • RS Stock No. 285-0267
  • Mfr. Part No. LSCS 16
Subtotal (1 unit)
TWD1,804.00(exc. GST)
Temporarily out of stock
Ewellix Makers in Motion Linear Guide Carriage LLTHZ 20 S6 LLTHZ S6 Series
  • RS Stock No. 184-9760
  • Mfr. Part No. LLTHZ 20 S6
Subtotal (1 unit)
TWD453.00(exc. GST)
In Stock
INA Linear Guide Carriage KWSE20-V1-G3 KWSE20 Series, 22 N Dynamic Load
  • RS Stock No. 172-1040
  • Mfr. Part No. KWSE20-V1-G3
Subtotal (1 unit)
TWD7,085.00(exc. GST)
In Stock
Ewellix Makers in Motion 0.6 m Long Steel Closed Bush Shaft, 14 mm Shaft Diam., Hardness 64 HRC, h6 Tolerance
  • RS Stock No. 352-0541
  • Mfr. Part No. LJM14X600ESSC2
Subtotal (1 unit)
TWD1,294.00(exc. GST)
In Stock
Igus RJUM-01-12 Bearing with 12 mm ID 22 mm OD 960 N 6720 N
  • RS Stock No. 311-3468
  • Mfr. Part No. RJUM-01-12
Subtotal (1 unit)
TWD570.00(exc. GST)
Stocked by manufacturer
THK SRS9X Series, SRS9X-195LM(GK), Linear Guide Rail 9 mm width 195 mm Length
  • RS Stock No. 620-016
  • Mfr. Part No. SRS9X-195LM(GK)
Subtotal (1 unit)
TWD2,230.00(exc. GST)
Stocked by manufacturer
THK HSR30 Series, HSR30-1320L(GK), Linear Guide Rail 30 mm width 1320 mm Length
  • RS Stock No. 619-774
  • Mfr. Part No. HSR30-1320L(GK)
Subtotal (1 unit)
TWD13,719.00(exc. GST)
In Stock
THK SHS20 Series, SHS20-640L(GK), Linear Guide Rail 20 mm width 640 mm Length
  • RS Stock No. 730-0124
  • Mfr. Part No. SHS20-640L(GK)
Subtotal (1 unit)
TWD7,618.00(exc. GST)
1
2
3
103
Results per page

Related links