ATE Electronics 18kΩ Wire Wound Resistor 13W ±5% 10SR-18k-J
- RS Stock No.:
- 124-1914
- Mfr. Part No.:
- 10SR-18k-J
- Manufacturer:
- ATE Electronics
The image is for reference only, please refer to product details and specifications
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 124-1914
- Mfr. Part No.:
- 10SR-18k-J
- Manufacturer:
- ATE Electronics
Product overview and Technical data sheets
Legislation and Compliance
Product Details
ATE Electronics SR Series Capacitor Balancing Resistors
The SR series of capacitor balancing resistors from ATE Electronics offers ±5% tolerance as standard. These resistors are available in E24 Series ohmic values. Featuring a dielectric strength of 1000 V ac, these balancing resistors can be used to minimise voltage imbalance from capacitors connected in a series. SR capacitor balancing resistors offer temperature coefficient values of ±100 to ±30 ppm from 10 Ω upwards. SR series resistors have been vibration tested to IEC 60571-1 standards. SR10 resistors have a 31.8mm centre and SR7 resistors have a 22.2mm centre. The fixing centre dimensions cover most of the screw terminal electrolytic capacitor offering.
Standards
IEC 60571-1
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Capacitor Balancing Resistors
Specifications
Attribute | Value |
|---|---|
| Resistance | 18kΩ |
| Power Rating | 13W |
| Tolerance | ±5% |
| Technology | Wire Wound |
| Series | 10SR |
| Temperature Coefficient | ±50ppm/°C |
| Maximum Operating Temperature | +350°C |
| Minimum Operating Temperature | -55°C |