WJ Furse, ESP Surge Suppressor Unit 16.7 V Maximum Voltage Rating 5kA Maximum Surge Current RS485 Surge Protector
- RS Stock No.:
- 788-6744
- Mfr. Part No.:
- 7TCA085400R0191 ESP RS485
- Manufacturer:
- WJ Furse
The image is for reference only, please refer to product details and specifications
Stock check temporarily unavailable - call for stock availability
Added
Price (VAT excluded) Each
TWD10,521.00
(exc. GST)
TWD11,047.05
(inc. GST)
| Units | Per unit |
| 1 - 4 | TWD10,521.00 |
| 5 - 9 | TWD10,204.00 |
| 10 - 24 | TWD9,891.00 |
| 25 - 49 | TWD9,677.00 |
| 50 + | TWD9,467.00 |
- RS Stock No.:
- 788-6744
- Mfr. Part No.:
- 7TCA085400R0191 ESP RS485
- Manufacturer:
- WJ Furse
Product overview and Technical data sheets
- Protection for Data and Signal Lines in Intrinsically Safe Circuits Application Note
- Choosing the Correct Furse ESP Lightning Barrier for your Application
- Protection of Wind Turbines Application Note
- Protection of Photovoltaic (PV) Systems Application Note
- ABB IET Wiring Regulations BS 7671 18TH Edition
- Datasheet - 7TCA085400R0191 ESP RS485
- Brochure - M Series
- Catalogue - Earthing & Lightning Protection
- Instruction Sheet - Furse Slim Line ESP Surge Protection Devices
Legislation and Compliance
Product Details
WJ Furse Surge Suppressor Unit, 16.7V AC / DC Maximum Voltage, 54 (H) x 19 (D) x 120mm (L) - E Series - 7TCA085400R0191 ESP RS485
Protect your process control equipment and communication interfaces against voltage spikes with this surge suppressor from WJ Furse. The unit safely grounds electrical faults caused by lightning and is able to handle a partial surge while still allowing the devices it's protecting to carry on working. This means you benefit from reduced downtime and improved productivity. Colour-coded terminals let you quickly distinguish between clean and dirty lines. For convenience, this component is supplied ready for flat mounting on its side or base.
Features & Benefits
• Flame-retardant polymer housing to reduce the risk of the unit contributing to a fire
• Low in-line resistance for minimal reduction in a system's signal strength
• Slim width of 7mm, so ideal for the compact protection of a large number of lines
• Wide operating temperature range of -40°C to +80°C for compatibility with demanding conditions
• Low in-line resistance for minimal reduction in a system's signal strength
• Slim width of 7mm, so ideal for the compact protection of a large number of lines
• Wide operating temperature range of -40°C to +80°C for compatibility with demanding conditions
Applications
• Commercial and residential buildings
• Food and beverage industry
• Automated assembly lines
• Food and beverage industry
• Automated assembly lines
Where should I install this surge suppressor?
You can install this surge suppressor close to the equipment it's protecting or in series with a signal line, near where it enters or leaves a building.
Transient Voltage Suppressors (Data Lines)
Specifications
Attribute | Value |
|---|---|
| Suppressor Type | RS485 Surge Protector |
| Maximum Voltage Rating | 16.7 V |
| Mounting Type | DIN Rail |
| Maximum Surge Current | 5 kA, 20kA |
| Series | ESP |
| Length | 105mm |
| Depth | 38mm |
| Height | 54mm |
| Dimensions | 120 x 54 x 19mm |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +80°C |