Schneider Electric Two Hand Control Safety Relay, 24V ac/dc, 2 Safety Contacts
- RS Stock No.:
- 731-8957
- Mfr. Part No.:
- XPSBCE3110C
- Manufacturer:
- Schneider Electric
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 731-8957
- Mfr. Part No.:
- XPSBCE3110C
- Manufacturer:
- Schneider Electric
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
XPS BCE Series for Two Hand Control, Type IIIC
From Schneider Electric we offer you the Preventa XPS range of Safety relays (safety modules) providing the solution and answer to monitoring safety relay functions. The relays include redundancy principle micro-pressor technology providing you with advanced functionality. There are various safety relay models to choose from, including removeable terminal block versions, allowing easy selection of a module to monitor a safety functions.
Features.
Incorporates relay outputs for two hand control applications
Compact and robust design
The enclosure has a protection class rating of IP40 and the terminals are protected to IP20
To initiate a dangerous movement, both operators (two-hand control pushbuttons) must be activated within an interval of less than 0.5 s (synchronous activation)
Three LEDs to indicate control/fuse supply, feedback loop and safety output contact status
PL e/Category 4 conforming to EN/ISO 13849-1, SILCL 3 conforming to EN/IEC 62061
Cage clamp and pluggable versions are available
Compact and robust design
The enclosure has a protection class rating of IP40 and the terminals are protected to IP20
To initiate a dangerous movement, both operators (two-hand control pushbuttons) must be activated within an interval of less than 0.5 s (synchronous activation)
Three LEDs to indicate control/fuse supply, feedback loop and safety output contact status
PL e/Category 4 conforming to EN/ISO 13849-1, SILCL 3 conforming to EN/IEC 62061
Cage clamp and pluggable versions are available
The safety relays are suitable for all applications with hazards and protect machines and operators.
These safety modules can be used in conjunction with the Harmony XY2SB range of two-hand control stations
What Safety Relay should I use with a Two Hand Control Station?
Safety modules XPS BA, BC and BF may be used for two-hand control stations in order to comply with the requirements of European standard EN 574/ISO 13851 for two-hand control systems.
Approvals
UL, CSA, BG
XPSBCE3110C Two Hand Control Preventa Safety Relay Safety Module.
- XPSBCE Series safety relay.
- For electrical monitoring of two-hand control stations applications.
- Spring terminals.
- 2 NO output, volt free.
- 1 NC additional circuit.
- 24 V ac/dc rated voltage.
- 50/60 Hz frequency.
- Internal, electronic protection.
- 1 NC + NO inputs.
- Breaking capacity - B300 holding 160 VA AC-15 for relay output, B300 inrush 3600 VA AC-15 for relay output.
- Minimum output current 10 mA for relay output.
- Minimum output voltage 17 V for relay output.
- 3 LEDs
- 35 mm symmetrical DIN rail mounting.
- IP40(Enclosure) conforming to EN/IEC 60529.
- IP20(Terminals) conforming to EN/IEC 60529.
Safety Level.
- Can reach SILCL 3 conforming to EN/IEC 62061. Can reach PL e/category 4 conforming to EN/ISO 13849-1.
Standards.
- EN 574 type III C/ISO 1385,1 EN/IEC 60204-1, EN/IEC 60947-5-1.
Specifications
Attribute | Value |
|---|---|
| Supply Voltage | 24V ac/dc |
| Safety Contacts | 2 |
| Function | Two Hand Control |
| Auxiliary Contacts | 1 |
| Range | Preventa |
| Safety Category ISO 13849-1 | 4 |
| PL ISO 13849-1 | e |
| SIL IEC 61508 | 3 |
| Terminal Type | Cage Clamp |
| Depth | 114mm |
| Width | 22.5mm |
| Series | XPS BCE |
| Performance Level | e |
| Length | 111mm |