Phoenix Contact DIN Rail Mounting Kit, for use with DIN rail unit, ME 17.5 TBUS 1.5/ 5-ST-3.81 GN Series
- RS Stock No.:
- 507-2353
- Mfr. Part No.:
- 2709561
- Manufacturer:
- Phoenix Contact
6 In Global stock for delivery within 6 working day(s)
30 In Global stock for delivery within 6 working day(s)
Added
Price (VAT excluded) Each (In a Pack of 2)
TWD321.50
(exc. GST)
TWD337.58
(inc. GST)
| Units | Per unit | Per Pack* |
| 2 + | TWD321.50 | TWD643.00 |
| *price indicative | ||
- RS Stock No.:
- 507-2353
- Mfr. Part No.:
- 2709561
- Manufacturer:
- Phoenix Contact
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- DE
Product Details
Power Transmission Sources, MINI POWER 24 V
MINI POWER
Wide range input for global use
Single-phase, primarily switched
Slim design
Good operational safety due to lengthy mains buffering under full load
Power boost to start difficult loads reliably (power reserve of up to 100%)
Parallel circuit to improve power and redundancy
Wide temperature range = suitable for outdoor installation
Preventive function monitoring through LED signalling and an active switching output for remote diagnosis
Adjustable output voltage
Device connection with double terminal for positive and negative to provide fast potential distribution
Top-hat rail mounting
Single-phase, primarily switched
Slim design
Good operational safety due to lengthy mains buffering under full load
Power boost to start difficult loads reliably (power reserve of up to 100%)
Parallel circuit to improve power and redundancy
Wide temperature range = suitable for outdoor installation
Preventive function monitoring through LED signalling and an active switching output for remote diagnosis
Adjustable output voltage
Device connection with double terminal for positive and negative to provide fast potential distribution
Top-hat rail mounting
Rail-Mount Bus Connector ME.17.5
5-pole
Enables the supply of additional modules of the same system with a regulated voltage of 24 Vdc
For housing widths of 17.5 mm
Can only be used in conjunction with the MINI POWER 24 Vdc / 1.5 A
Two rail-mount bus connectors are required per power transmission source
DIN rail assembly
Enables the supply of additional modules of the same system with a regulated voltage of 24 Vdc
For housing widths of 17.5 mm
Can only be used in conjunction with the MINI POWER 24 Vdc / 1.5 A
Two rail-mount bus connectors are required per power transmission source
DIN rail assembly
Standards
EN 60950 / VDE 0805 (SELV), EN 61558-2-17, EN 50178 / VDE 0160 (PELV), DIN VDE 0100-410 / DIN VDE 0106-1010
Approvals
CE, UL
Specifications
Attribute | Value |
|---|---|
| Accessory Type | DIN Rail Mounting Kit |
| For Use With | DIN rail unit |
| Series | ME 17.5 TBUS 1.5/ 5-ST-3.81 GN |