Fluke 190 II Series 190 ScopeMeter Oscilloscope, Handheld, 2 Channels, 100MHz

  • RS Stock No. 737-8268
  • Mfr. Part No. FLUKE-190-102/UN/S
  • Manufacturer Fluke
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): RO
Product Details

Fluke Industrial ScopeMeter 190 Series II

The 190 Series ScopeMeters are the first two and four channel industrial portable oscilloscopes allowing measurements in harsh, hazardous and dirty environments with the highest CAT IV 600V safety rating. With these features the ScopeMeter 190 Series II can be used for measurements in Single-phase and Three-phase industrial distribution up to outside and service entrance. The standard features like TrendPlot™, Connect-and-View™ triggering, and ScopeRecord™ allow quick diagnosis of industrial machinery, automation and process controls problems. The Automatic capture and the display of the last 100 screens allows the review of observed anomalies.

Instrument dimensions 270 x 190 x 70 mm
Display 153mm full colour LCD with fast update rate
CAT III 1000V/ CAT IV 600V overvoltage categories
Real-time sampling rates up to 2.5 GS/s and 400 ps resolution
Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
Single shot, pulse width, and video triggering
Isolated USB ports for memory devices and PC connectivity
IP-51 rated for dust and drip proof to withstand harsh environments
Li-ion battery technology offering 8 hour battery life
Operating temperature 0°C to 40°C (including batteries) or 0°C to 50°C (without batteries)

Supplied with

Set of 4 probes (4-channel models) or 2 probes (2-channel models), handstrap (fixed to instrument), hanging strap, USB cable, Li-ion battery BP290, a FlukeView demo package and user manuals on CD-ROM

Fluke ScopeMeter Oscilloscope

The Fluke 190 II series, 2-channel, 100MHz is a scopemeter oscilloscope and has the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. It is designed for plant maintenance engineers and technicians. This scopemeter also features tough scopemeter test tools, which are feasible to use in harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications. It is one test tool that tackles just about any troubleshooting task. This instrument includes a multimeter and its ScopeRecord ™ recording modes enable hands-free operation through Connect-and-View ™ triggering.
Supplied with
Set of 4 probes (4-channel models) or 2 probes (2-channel models), hand strap (fixed to the instrument), hanging strap, USB cable, Li-ion battery BP290, a FlukeView demo package and user manuals on CD-ROM
.

Features and Benefits

• Rise time is 3.5ns
• Two electrically isolated inputs
• Fast sampling rate, up to 1.25GS/s with up to 400ps resolution
• Deep memory of 10,000 samples per channel waveform capture for zooming into details
• Quad meter measurements via scope BNC inputs
• Connect-and-View continuous auto-trigger, single shot, pulse width and video triggering
• ScopeRecord roll mode
• Capture waveform sample data for up to 48 hours
• TrendPlot and trend measurement readings for up to 22 days
• Advanced automatic measurements of power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
• Isolated USB ports for memory devices and PC connectivity
• Li-Ion battery for extended operating timespan
• Charge spare battery using optional external battery charger EBC290
• Easy-access battery door to make it easy to swap batteries
• Handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington lock
• Gain four times the diagnostic power plus CAT IV safety rating
• Three-dimensional testing for industrial systems
• Operating temperature ranges between 0°C and 40°C (including batteries) or between 0°C and 50°C (without batteries)

Applications

• Audio and video recording equipment
• Designing
• Research & Development
• Testing in manufacturing
• Testing of signals voltage in radio broadcasting equipment
• Testing signal voltage in-circuit debugging

Certifications

• IP51 rated

Fluke Industrial ScopeMeters

The small, lightweight hand held digital oscilloscopes are ideal for use by technicians working in service, maintenance and installation applications. Features include:

Intuitive menu driven operation
Reliable automatic (and manual) triggering including motor drives and video
Connect and View™ hands off operation provides stable, reliable and repeatable display of signals without touching a button
Measurements include: V dc, VAC True RMS, Hz, duty cycle, pulse width, dBV, dBm, phase A to B, crest factor, Ohms, continuity, frequency, diode and capacitance
40 ns glitch capture
Dual channel Trendplot™ displays graphs of max. and min. readings with time and date stamp
High brightness, high contrast LCD display
Single shielded test lead type for each channel is used for all measurement including DSO and digital multimeter functions
Rugged and splash proof design with integral holster for reliable operation.
Safety designed to meet IEC 1010-1 Cat III 600 V for industrial power systems

Specifications
Attribute Value
Number of Channels 2
Bandwidth 100MHz
Oscilloscope Type Handheld
Series 190 II
Power Source Battery, Mains
Display Type LCD
Minimum Vertical Sensitivity 2mV/div
Maximum Vertical Sensitivity 100V/div
Minimum Time Base 5ns/div
Screen Size 6in
Sample Rate Random 1.25 Gsps
Battery Type Rechargeable Lithium-Ion
Safety Category Voltage 600 V, 1000 V
Vertical Resolution 8 bit
Rise Time 3.5ns
Model Number p 190
Safety Category CAT III 1000 V, CAT IV 600 V
Safety Category Level CAT III, CAT IV
3 In stock for delivery within 6 working days
Price (VAT excluded) Each
TWD 165,953.00
(exc. GST)
TWD 174,251.00
(inc. GST)
units
Per unit
1 +
TWD165,953.00