Tektronix TCP0030A Oscilloscope Probe, Probe Type: Current 120MHz
- RS Stock No. 781-0807
- Mfr. Part No. TCP0030A
- Manufacturer Tektronix
Tektronix TCP Series
The Tektronix TCP300 Series of split-core current probes incorporates transformer and Hall effect technology. The TCP300 models TCP303 (796-2683 ), TCP305A ( 781-0810 ) and TCP312A ( 781-0801 ) are used with amplifier TCPA300 ( 764-4391 ), available separately, to provide high performance capability from low level milliamp measurements to the measurement of very high current levels. The TCP0030A ( 781-0807 ) is powered directly by oscilloscopes with the TekVPI interface.
Easy-to-use and accurate AC/DC current measurements
Connects to some Tektronix oscilloscopes using the TekVPI™ probe interface
Provides automatic units scaling and readout on the oscilloscope display
Split-core construction allows easy circuit connection
Typically less than 1% DC gain error
Low Noise and DC Drift
Easy to Degauss and Autozero
Setup controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu
Tektronix Oscilloscope Probes
The Tektronix current oscilloscope probe is designed for direct connection to oscilloscopes with the probe interface. This AC/DC current measurement probe provides greater than 120MHz bandwidth with selectable 5A and 30A measurement ranges. It also provides exceptional low current measurement capability and accuracy to current levels as low as 1mA.
Features and Benefits
• Bandwidth is DC to 120MHz
• Rise time is 2.92ns
• Maximum DC and RMS current is 30A
• Maximum peal pulse voltage 50A
• Maximum Input voltage is 150V CAT II
• Split-core construction allows easy circuit connection
• Typically less than 1% DC gain error
• Low noise and DC drift
• Easy to Degauss and Autozero
• set-up controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu
• Intelligent communication with TekVPI™ oscilloscopes provides:
• -Units scaling and readout. Automatic, on-screen readout of amps and magnitude. Manual set-up is not required Hand calculation from volts to amps is unnecessary
• -Push button degauss and Autozero functionality
• -Probe status and diagnostic indicator LEDs
• -Remote GPIB/USB probe control
•
Applications
• Power supply design
• Design motor drive
• Electronic ballast
• Power semiconductors
• Switch mode control
• UPS systems
• Power converters
• Mobile communications
• Motor drives
• Industrial/consumer electronics
Certifications
• CE compliant
• WEEE compliant
Supplied with
probe ground lead 6in (152.4mm) long, Nylon carrying case, instruction manual
| Attribute | Value |
|---|---|
| Probe Type | Current |
| Bandwidth | 120MHz |
| Connector Type | BNC |
| Model Number p | TCP0030A |
| Number of Probes | 1 |
| Safety Category Level | CAT II |
| Safety Category Voltage | 150 V, 300 V |
| Series | TCP |
| Safety Category | CAT II 150 V, CAT II 300 V |
| Rise Time | 2.92ns |
