Tektronix TCP312A Oscilloscope Probe, Probe Type: Current 100MHz

  • RS Stock No. 781-0801
  • Mfr. Part No. TCP312A
  • Manufacturer Tektronix
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): CN
Product Details

Tektronix TCP Series

The Tektronix TCP300 Series of split-core current probes incorporates transformer and Hall effect technology. The TCP300 models TCP303 (796-2683 ), TCP305A ( 781-0810 ) and TCP312A ( 781-0801 ) are used with amplifier TCPA300 ( 764-4391 ), available separately, to provide high performance capability from low level milliamp measurements to the measurement of very high current levels. The TCP0030A ( 781-0807 ) is powered directly by oscilloscopes with the TekVPI interface.

Easy-to-use and accurate AC/DC current measurements
Connects to some Tektronix oscilloscopes using the TekVPI™ probe interface
Provides automatic units scaling and readout on the oscilloscope display
Split-core construction allows easy circuit connection
Typically less than 1% DC gain error
Low Noise and DC Drift
Easy to Degauss and Autozero
Setup controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu

Tektronix Oscilloscope Probes

The Tektronix current oscilloscope probe offers current measurement capabilities of 30ADC continuous. The amplifier, when used with provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. This oscilloscope onscreen readout of magnitude and amps reduces measurement errors with no more hand calculations.
Note:
Requires TCPA300 amplifier available separately

Features and Benefits

• Bandwidth is DC to 10MHz
• Lowest measurable current is 1mA
• Insertion impedance is 0.7ohm at 100MHz
• Rise time is 7ns
• Typically less than 1% DC gain error
• Bare insulated maximum wire voltage is 150V CAT II and 300V CAT II
• Low insertion impedance reduces device under test loading
• Split-core construction allows easy circuit connection
• Status indicators provide visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50ohm
• Low DC drift and noise allows improved low-level current measurements

Applications

• Development and analysis solutions for designers
• Installers and service personnel in telecom data communication
• Computers
• Semiconductor power electronics environments

Certifications

• UL61010-2-032 approved
• UL61010-1 approved
• CAN/CSA C22.2 No 61010-1 certified
• CAN/CSA C22.2 No 61010-2-032 certified
• EN61010-1
• EN61010-2-032
• CAT II 150V
• CAT II 300V

Note

Requires TCPA300 amplifier (764-4391) available separately

Approvals

UL61010-2-032, UL61010-1, CAN/CSA C22.2 No 61010-1, CAN/CSA C22.2 No 61010-2-032, EN61010-1, EN61010-2-032

Specifications
Attribute Value
Probe Type Current
Bandwidth 100MHz
Connector Type BNC
Model Number p TCP312A
Number of Probes 1
Safety Category Level CAT II
Safety Category Voltage 150 V, 300 V
Series TCP300
Safety Category CAT II 150 V, CAT II 300 V
Rise Time 3.5ns
4 In stock for delivery within 6 working days
Price (VAT excluded) Each
TWD 83,871.00
(exc. GST)
TWD 88,065.00
(inc. GST)
units
Per unit
1 +
TWD83,871.00