Tektronix THDP0100 Oscilloscope Probe, Probe Type: Differential, High Voltage 100MHz 6kV
- RS Stock No. 752-7353
- Mfr. Part No. THDP0100
- Manufacturer Tektronix
Tektronix High Voltage Differential Probes TMDP, THDP and P52xxA Series
Tektronix high voltage probing solutions offer safety and accuracy in applications which include: floating measurements; switching power supply design; motor drive design; electronic ballast design; CRT display design; power converter design and service; power device evaluation.
Overrange indicator
Safety certified
Switchable attenuation
Switchable bandwidth limit
Cable length 1.5m (THDP & TMDP), 1.8m (P52xxA)
Note
TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required setup controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope. Tektronix high voltage differential probes include: TMDPO200 ( 752-7366 ); THDPO200 ( 752-7357 ); THDP0100 ( 752-7353 ); P5200A ( 734-5029 ); P5202A ( 734-5022 ); P5205A ( 734-5026 ); P5210A ( 734-5035 ).
Tektronix Oscilloscope Probes
The Tektronix differential high voltage oscilloscope has the largest differential dynamic range capability. It allows the user to safely measure up to ±6000V. The probe supports bandwidths up to 100MHz and slew rates up to 2500V/ns at 1/1000 gain. This probe is supplied with two sizes of hook tips and has an over-range visual and audible indicator that warns the user when they are exceeding the linear range of the probe.
Note:
TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope.
The THDP0100 is capable of measuring floating voltages up to 6000V safely. An over-range visual and audible indicator warns the user when the linear range of the probe is exceeded.
Supplied with:
• 2 probe tips
• 2 large hook clips
• 2 small hook clips
• 2 probe heads
Features and Benefits
• Bandwidth is DC to 200MHz
• Attenuation ratio is 1:100 and 1:1000
• Rise time is 3.5ns
• Input impedance is 40Mohmll2.5pF
• Maximum common mode voltage is ±6000KV
• Maximum Input voltage is 2300V CAT I 1000V CAT III
• Typical CMRR DC: >-80dB/100 kHz: >-60dB/3.2 MHz: >-30dB/100 MHz: >-26dB
• Overrange Indicator
• Safety Certified
• Switchable attenuation
• Switchable bandwidth limit
•
Applications
• Floating measurements
• Switching power supply design
• Motor drive design
• Electronic ballast design
• CRT display design
• Power converter design and service
• Power device evaluation
• BNC interface (P5200A probes)
• TekVPI interface (TMDP and THDP Series probes)
• TekProbe interface
Certifications
• CE certified
• ISO certified
• CAT I 2300 V
• CAT III 1000 V
Supplied with
2 probe tips, 2 large hook clips, 2 small hook clips, 2 probe heads
| Attribute | Value |
|---|---|
| Probe Type | Differential, High Voltage |
| Attenuation | 1:100, 1:1000 |
| Bandwidth | 100MHz |
| Maximum Common Mode Input Voltage | 6kV |
| Connector Type | BNC |
| Model Number p | THDP0100 |
| Safety Category Level | CAT I, CAT III |
| Safety Category Voltage | 1000 V, 2300 V |
| Series | THD |
| Safety Category | CAT I 2300 V, CAT III 1000 V |
| Rise Time | 3.5ps |
