Phoenix Contact UT 4-DIO/L-R Series Grey Feed Through Terminal Block, 4mm², Single-Level, Screw Termination
- RS Stock No.:
- 804-3250
- Mfr. Part No.:
- 3046210
- Manufacturer:
- Phoenix Contact
- RS Stock No.:
- 804-3250
- Mfr. Part No.:
- 3046210
- Manufacturer:
- Phoenix Contact
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- PL
Product Details
Phoenix Contact Feed-Through Terminal Block, Screw Termination Method, 500mA Current Rating - UT 4-MTD-DIO/L-R - 3046210
Keen to connect multiple conductors in your electrical setup? This Phoenix Contact feed-through terminal block does the trick. Its screw terminals let you quickly and easily wire up the block with just a screwdriver, so you'll have your system up and running in a flash. PA insulation helps keep electric shocks at bay to support workplace safety.
Thanks to its rated surge voltage of 8kV, electrical hazards are no match for this unit. It accepts wire sizes between 26 and 10AWG, so it's a breeze to incorporate into your existing setup. As it clips into place on a DIN rail, you can install it in a snap. You can use a terminal block like this for signal and power distribution applications like control panels or automation systems.
Thanks to its rated surge voltage of 8kV, electrical hazards are no match for this unit. It accepts wire sizes between 26 and 10AWG, so it's a breeze to incorporate into your existing setup. As it clips into place on a DIN rail, you can install it in a snap. You can use a terminal block like this for signal and power distribution applications like control panels or automation systems.
Features & Benefits
Wide operating temperature range between -60°C and +105°C for use in demanding conditions
UL 94-V0 flammability rating means it stops burning in 10 seconds or less for safety in the event of a fire
Current rating of 500mA for compatibility with low-current systems
Light weight of 11.42g won't strain your rail
UL 94-V0 flammability rating means it stops burning in 10 seconds or less for safety in the event of a fire
Current rating of 500mA for compatibility with low-current systems
Light weight of 11.42g won't strain your rail
Phoenix Contact CLIPLINE UT Range
Specifications
Attribute | Value |
---|---|
Colour | Grey |
Number of Levels | Single |
American Wire Gauge | 26 → 10AWG |
Series | UT 4-DIO/L-R |
Termination Method | Screw |
Cable CSA | 4mm² |
Current Rating | 500mA |
Voltage Rating | 800 V |
Minimum Operating Temperature | -60°C |
Maximum Operating Temperature | +105°C |
Standards Met | CSA, cULus, EAC, REACH |
Model Number | UT 4-MTD-DIO/L-R |