Schneider Electric Advanced Motor Starter, 7.5 hp, 12 A

This is one of the two basic units which is required everytime, together with a control unit. It is independent of the control voltage motor power and incorporates the breaking function

Breaking capacity of 50kA @400Vac
Short circuit protection
Disconnection/isolation
Two auxiliary contacts (1NO+1NC)
Padlockable
45mm wide

Current shown is when at a voltage of 440V is utilised. LUB**** series power bases are non-reversing, LU2B**** series are reversing types.

Schneider are in the process of amending the colour of the TeSys range, from White to Black. This means that the stock you receive could be either of these colours. Please be assured that the colour change in no way affects the Fit, Form or Function of the product.

In the market for a motor protection and starting solution? Choose this advanced motor starter from Schneider Electric. When combined with a compatible control unit, it's handy for powering three-phase motors up to 5.5kW and 400V and protecting them from electrical faults during operation. As a three-pole device, it's a practical pick for use with up to three connected components. A sophisticated motor management system gives you access to detailed info about all the motor starters in your installation for easy monitoring of your whole network. Thanks to this unit's modular plug-and-play design, maintaining it or adding further modules is a breeze.

• Versatile mounting options mean you can clip it onto a standard DIN rail or screw it securely in place
• Rotary handle can be secured with a padlock to prevent tampering
• Blanking shutters cover unused cavities to reduce the risk of electric shocks
• Resists shock and vibration for safe use near moving machinery

• Automotive manufacture
• Agricultural machinery
• Industrial engines

An impulse withstand voltage rating of 6kV indicates the unit can tolerate significant voltage surges without the risk of it suffering damage.

Schneider Electric TeSys U

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

Faster design with fewer components needed
Quicker panel build with faster assembly time and fewer wires per starter
Space saving 45mm width up to 32A (even for reversing) allowing smaller panels
Flexible and upgradeable with plug-and-play function modules
Voltage and protection parameters can be determined after assembly and wiring
Broad band electronic control unit provides improved overload protection with fewer components
Expandable plug-and–play diagnostics
Total co-ordination for fast return to service after a short circuit fault

Tesys model U is easy to select:

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option