- RS Stock No.:
- 203-6952
- Mfr. Part No.:
- SL353HT
- Manufacturer:
- Honeywell
40 In stock for delivery within 6 working days
Added
Price (VAT excluded) Each (In a Pack of 10)
TWD42.60
(exc. GST)
TWD44.73
(inc. GST)
Units | Per unit | Per Pack* |
10 - 740 | TWD42.60 | TWD426.00 |
750 - 1490 | TWD41.60 | TWD416.00 |
1500 + | TWD41.00 | TWD410.00 |
*price indicative |
- RS Stock No.:
- 203-6952
- Mfr. Part No.:
- SL353HT
- Manufacturer:
- Honeywell
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- CN
Product Details
Honeywell SL353 Series Digital Hall-effect Sensor
The Sl353 series sensor ICs 9internal circuits) have been designed to offer the user a small, versatile, digital hall0effect device operated by the magnetic field of a permanent magnet or an electromagnet. They have a low power requirement and are sited to many possible applications. They are able to operate from a supply voltage as low as 2.2 V helping with energy efficiency. They can respond to either a North or South pole. This helps reduce instillation time as the user does not need to identify the magnetic polarity.
The SLS353HT has been designed as a High Duty Cycle unit and is ideal for applications requiring a high switching speed and a lower current then standard Hall Effect sensors.
The SLS353LT has been designed as a very Low Duty Cycle unit and thus ideal for applications requiring a low switching speed but with a requirement to extend battery life and operate with an extremely low current drain.
The SLS353HT has been designed as a High Duty Cycle unit and is ideal for applications requiring a high switching speed and a lower current then standard Hall Effect sensors.
The SLS353LT has been designed as a very Low Duty Cycle unit and thus ideal for applications requiring a low switching speed but with a requirement to extend battery life and operate with an extremely low current drain.
Features:
Energy efficient: SL353HT 0.33 mA typical, SL353LT 1.8 μA typical
Push-pull output does not require external pull-up resistor
Non-chopper stabilized design
SOT-23 sub miniature package size requires less PCB space
Energy efficient: SL353HT 0.33 mA typical, SL353LT 1.8 μA typical
Push-pull output does not require external pull-up resistor
Non-chopper stabilized design
SOT-23 sub miniature package size requires less PCB space
Honeywell Micropower Hall Effect Sensor, 5 to 110Gs, 3-Pin - SL353 Series - SL353HT
Choose this micropower Hall effect sensor from Honeywell for reduced power consumption in your sensing applications. Its BiCMOS (bipolar complementary metal-oxide semiconductor) technology and an innovative timing circuit turn power on for only a short time to ensure a high degree of energy efficiency. The sensor is simple to install as it responds to either a north or south pole, meaning you don't have to identify magnet polarity beforehand. This unit is compatible with a low supply voltage of 2.2V, so it's suitable for use with mobile, battery-operated devices.
Features & Benefits
• Thermally balanced integrated circuit provides stable operation over a wide temperature range of -40°C to +85°C for use in demanding environments
• Omnipolar function makes it compatible with both high and low-duty cycles for improved versatility in use
• Miniature size requires less space on a PCB (printed circuit board) for maximum space efficiency
• Omnipolar function makes it compatible with both high and low-duty cycles for improved versatility in use
• Miniature size requires less space on a PCB (printed circuit board) for maximum space efficiency
Applications
• Mobile printer head position sensing
• Remote battery-operated water meters
• Hand-held medical and dentistry equipment
• Remote battery-operated water meters
• Hand-held medical and dentistry equipment
Does this sensor require any external components to operate?
No, the push-pull output doesn't need an external pull-up resistor and works with most electrical circuits for greater ease of use.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Hall Effect Sensors, Honeywell
Specifications
Attribute | Value |
---|---|
Sensor Type | Hall Effect Sensors |
Mounting Type | Surface Mount |
Magnetic Type | Omnipolar |
Maximum Operating Supply Voltage | 5.5 V |
Minimum Operating Supply Voltage | 2.2 V |
Package Type | SOT-23 |
Pin Count | 3 |
Maximum Operating Temperature | +85 °C |
Minimum Operating Temperature | -40 °C |