2120 Series Fork Level Switch Vibrating Level Switch, Direct Load Output, Side or Top Mount, Aluminium Body, ATEX-Rated
- RS Stock No.:
- 794-3430
- Mfr. Part No.:
- 2120D1AT1E1XA0000
- Manufacturer:
- Rosemount
Temporarily out of stock - back order for despatch 16/05/2024, delivery within 6 working days
Added
Price (VAT excluded) Each
TWD25,739.00
(exc. GST)
TWD27,025.95
(inc. GST)
| Units | Per unit |
| 1 + | TWD25,739.00 |
- RS Stock No.:
- 794-3430
- Mfr. Part No.:
- 2120D1AT1E1XA0000
- Manufacturer:
- Rosemount
Product overview and Technical data sheets
Legislation and Compliance
Product Details
Rosemount 2120 Vibrating Level Switch
The 2120 is a popular choice for its simplicity, ease-of-use, and reliability, in high and low level alarm applications.
When used as a low level alarm, the liquid in the tank or pipe drains down past the fork, causing a change of natural frequency that is detected by the electronics and switches the output state.
When used as a high level alarm, the liquid rises in the tank or pipe, making contact with the fork which then causes the output state to switch.
When used as a low level alarm, the liquid in the tank or pipe drains down past the fork, causing a change of natural frequency that is detected by the electronics and switches the output state.
When used as a high level alarm, the liquid rises in the tank or pipe, making contact with the fork which then causes the output state to switch.
8/16 mA (’Off’/’On’), Direct Load, PNP, Relay, or NAMUR switched output electronics (depending on version)
Threaded process connection for side, top, or bottom mounting
2 off M20 conduit entries for supplied cable gland and blanking plug (cable not supplied)
Easy selection of Dry ’On’ or Wet ’On’ Mode and Switching Delay
Magnetic test point makes functional test easy
Threaded process connection for side, top, or bottom mounting
2 off M20 conduit entries for supplied cable gland and blanking plug (cable not supplied)
Easy selection of Dry ’On’ or Wet ’On’ Mode and Switching Delay
Magnetic test point makes functional test easy
Vibrating Liquid Level Switches
Specifications
Attribute | Value |
|---|---|
| Device Type | Fork Level Switch |
| Mounting Type | Side or Top Mount |
| Switch Output | Direct Load |
| Body Material | Aluminium |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +150°C |
| Maximum Current | 500 mA |
| Maximum Pressure | 100bar |
| Gasket Material | Non Asbestos Sheet |
| Series | 2120 |
| Hazardous Area Certification | ATEX |