Crowcon Gas Detection Harness Plate for Multigas Monitor

  • RS Stock No. 467-9183
  • Mfr. Part No. C01842
  • Manufacturer Crowcon
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Gas Detection: Crowcon Tetra

The Tetra range of multi-gas personal detectors is ideal for users working in hazardous or confined environments with potential exposure to a range of toxic and flammable gases.

2, 3 or 4 gas versions available (Flammable FL, Oxygen O2, Hydrogen Sulphide H2S and Carbon Monoxide CO)
Easy to use single button operation with clear display guidance through operation
Robust – tough plastic construction with flexible internal assembly to resist shock and vibration, plus an overmoulded rubber layer for additional protection
Easy to read backlit graphic display
Indications of operating status can be viewed at a glance
Fully interchangeable intelligent sensor modules
90dBA audible alarm
Bright red/blue visual alarm

Internal vibrating alarm
2 levels of instantaneous alarm
Time weighted average alarm for 8 hours and 15 minutes averages
Peak level recall
LiON rechargable battery gives full 12 hours operation
30 day countdown warning for calibration due date
Water and dust resistant to IP65
IR link for RS-232

Dimensions 122 x 128 x 57mm Wt.498g  
Gas Range Alarm
Flammable 0-100% LEL 20% LEL
Oxygen 0-25% 19//23.5%
Hydrogen Sulphide 0-50ppm 5ppm
Carbon Monoxide 0-500ppm 30ppm
Typ. response times Flammable 20s, Toxic Gas 20's, Oxygen 10s  
Audible alarms 90dBA @ 30cm  
Visual alarms Dual Colour red/blue flashing LED pair in gas  
Vibrating alarm Internal vibrating alarm  
Display 128 x 64 graphic LCD with backlight, giving simultaneous display for all gas channels. Graphic symbols for battery (with proportional indication of remaining operation time), pump operation, healthy operation or fault warning.  
  Start up indication when calibration is due within 30 days, calibration overdue or service is required  
Display mode Normal display for continuous real time gas  
Datalogging Event logging  
Sampling Hand aspirator or internal electric sampling pump  
Op. temp. range -20° to 55°C, 0-99% RH  
European safety stds. EN50014, EN50020, EN50018  


Charger, 466-8464, must be ordered separately.

Supplied with

An integral belt/pocket clip.


EN50014, EN50020, EN50018, 94/9/EC

Attribute Value
Accessory Type Harness Plate
For Use With Multigas Monitor
Hazardous Area Certification ATEX
In stock for delivery within 4 working days
Price (VAT excluded) Each
TWD 1,251
(exc. GST)
TWD 1,314
(inc. GST)
Per unit
1 +